^ I tried that once, made the JLF way too loose.
L is Light.
C is Standard.
L has Operation Force of 75g.
C has Operation Force of 285g.
How do I take the E-Clip off of a LS-40-01?
Random button press register randomly on my madcatz SE (Mostly HK and start). The only Thing I TOUCHED was the buttons when I modded them. It is so bad, I can’t even play in training mode. Ans, sometimes the stick’s motions don’t register. No, its not online lag. Any help?
Thank you for clarifying that for me jdm. I was confused a bit because some sites were listing the D44L as a 285g… I figured that was wrong. Just needed some carification. Fortunately I was able to find some. Thanks again man.
Can I put this Sanwa bat top onto my MadCatz TE Round 2 just by unscrewing the current ball top and screwing this one on? Or does it require me to buy some sort of adapter,etc.?
Sanwa LB-30-N Bat Top, White
Also, does anyone know where I can buy some clear white Semitsu buttons? Most sites I’ve been to lately all seem to be sold out.
^Yes, you will need adapter.
Thread Adapter need.
No etc need.
Yes, no etc. required.
Here’s your Seimitsu buttons:Lizard Lick Amusements - Seimitsu PS-14-KN, 30mm Screw-In Pushbutton, White
Unless you wanted the rare PS-14-K snap in button in white. Then you’re just out of luck, and it’d make sense that nobody had any. Or something else by “clear white.” I’m just guessing that is what you meant.
Thanks Nerrage, as long as these will be able to be changed out on a stock Madcatz TE then its fine. Thanks to others for info.
They will fit perfectly. Both screw adapter and buttons. Screw adaptor was made for the JLF. TE has JLF. Buttons were for 30mm holes, and you have them with the TE.
*Hey man, thanks. Appreciate this thread, it answered alot of my questions. Will make sure to presevere with my new stick now! *
**
>.<
So do converters work backwards? As in can I somehow get a te to work with a ps2? I find this highly unlikely. Since madcats is having a sale on sticks I might in the slightest chance be able to get one. And I mainly play st and 3s, ps2.
Another question, does ebay/amazon do debit? I have enough money for a ps1/2 stick in my account but no credit card. I’m not getting into that debt mess.
There is no USB to anything.
Hey guys, I have a question about a dual mod I’m doing at the moment.
I’m doing a ps3/psone dual mod with a p360 joystick for a friend right now. I have a chimp and a psone digital pad to do this. So I hacked the pad and made sure it worked, assembled the chimp and did the same. I first attempted to piggyback the psone to the chimp and it didnt go so well. So now I’m going to try another method.
-have all the signals meet at a terminal barrier from both pcbs.
-Ground running directly between both pcbs along with a wire connecting vcc to 3.3v
- Each pcb has direct ground running to one of the switches which were all daisy chained.
- Each pcb has direct ground to the p360
-wire connecting the VCC on the chimp and 5v on the p360
http://img696.imageshack.us/img696/859/psonechimp.png
Uploaded with ImageShack.us
Will this work? Am I missing anything?
Ok, so that tek innovations website is never gonna come back up. So does anyone know what to do about printing your artwork?
Some grounds are redundant. I would connect bridge everything to through the terminal strip for cleaner wiring.
Also I had to use one of these 3.3v to 5v for an ASCII optical.
Power Supplies « Circuits@Home
Don’t know if the P360 needs 5v to function properly, but my ASCII didn’t register down because there wasn’t enough voltage to power the last optical led.
Does the LS-56 Octo Gate work for the LS-40?
Does not.
I have some Question About Neutrik as I’m not 100% sure what it does…
-
What is Neutrik & Whats it for…
-
How do I install one & is it easy ( I have a Round 2 TE )
-
What Things do I need to install one & how much it cost…
Thanks,