Hey Jasen, yep that’s fine. I have them higher res than what i posted here if you want. PM me and i’ll send through if so. Cheers!
curious on this too, definitely would want that solid lap feel
I actually just did this, I used some foam and spray adhesive from Michael’s and it came out great!
Is it possible to get just a PFS3 Hitbox case without all the ezbuild stuff inside? I have a brook PS4 pcb already soldered up with wires from another project that I would like to put into one of these cases. If not I probably hold off and do a full build later. Also will you be doing more White Sandtrex cases? I would love to build one out like the Midi Fighter. I love how clean the half clear white on white look is and would add some kaimanas to it.
White Sandtex is retired for now. Too little interest after the pre-order period but I do have some ideas for white later. The case comes as a kit with everything, nothing requires you to use it… other than it comes with it and I don’t offer discounted variants without it. There’s an entire customer support aspect to it and branding thing to consider… too long to delve into, but I think you get the idea.
Separately, the Panzer Fight Stick lineup is 4 years old!
Four years ago today I hatched the Panzer Fight Stick idea and ran with it. A lot of personal work, design, and learning since then. The first idea was to do a group buy to get the prices in line with where they needed to be but in the end I financed the entire operation out of pocket because I believed in it that much. Four years later I can say there are nearly 400 Panzer Fight Sticks in use (probably closer to mid 400s). Happy Birthday #PanzerFightStick!
Congrats Jasen! Still loving my Panzer Wide Body to this day!
Damn, I really wanted to buy a white one in the near future =[…I’m sure whatever variation you come up with, I will enjoy 
Fair enough. I’ve wanted the full flushed out ufb experience so I’ll probably do a diy with ufb when I get the money in black. Is there enough room for putting a Kaimana chameleon on the ufb and will the j2s fit on top of the button board?
Hey Jasen, my LS-62 is a little shorter than I like, it sits pretty far back with the joyustick mount/spacer inside the case. Any recommendations for getting the stick mounted a little closer to the top of the case or should I extend the joystick with an adapter or something? thanks dude
Jason,
How’s deployment going shipmate? Man, you really make an awesome product and I’m very interested, but when I go to the website, there aren’t any pre-built sticks left. Is building a stick from one of your sticks the only way to get a Panzer while you’re on duty? Thanks.
Either remove the acrylic joystick plate or sand it, removing it may leave it too long but try it out. As for sanding you can use rougher grit to quickly shave off material.
Removing the Acrylic spacer would help using a S-Plate. But be advised, i am not 100% sure the S-plates line up with the JLF mounting pattern. You might need to drill out some holes on the plate to make it fit.
Spencer is building them but is full at the moment. Once he gets caught up, fully built will be available again.
Appreciate the replies. I dremeled out the holes on the stock Seimitsu plate and got it on there.
Will the standoffs on the case be ok if I have it mounted like that without the spacer (3rd pic)?
thx
http://i.imgur.com/8wpcrrHl.jpg
Yup, thats 100% fine.
Thanks for the quick reply Jasen. 
Still using my original Panzer. You should also take it as an encouraging sign that Panzer sticks don’t often come up for sale in the trading outlet.
Awesome! That’s what I like to hear I don’t sell my personal ones very often and those who do typically run into some sort of financial issue requiring them to sell theirs.
OG fam here, this thing’s going to be the family heirloom.
Do you still make replacement panels for the te2? Ive been looking for a noir layout one for a while now.