Jasen I bought that USB port and it’s working much better now. I can move the Hitbox all over and it doesn’t lose connectivity. BTW the screws that come with that one are much longer and easier to install. Unless all future Panzer’s are going to come with the pro cable connection, I’d suggest moving to this port for the USB. Just my humble opinion tho. Thanks for your help.
Nice - it’s a little hard to tell from the angle on mine but the 30mm Up button is a Dark Hai (that same grey, though not with the clear rim).
Should get here tomorrow. So glad that it’ll be here before Tekken 7 lands. Plus I have a 3 day weekend. We’re in there.
Black USBs are all Switchcraft now, we made that switch as soon as the Neutrik’s ran out. Once silver neutrik’s run out, same.
Agree. I had to ask Spencer after I saw the picture to make sure it was Dark Hai. 
http://i.imgur.com/gdlOqAjl.jpg
http://i.imgur.com/UQW2Hl8l.jpg
LS-62-01, all Seimitsu buttons, love this stick! Thanks Jasen!!
Ah damnit, Fed ex just yanked the football and rescheduled my delivery for Wednesday.
“Good things come to those who wait”
“Absence makes the heart grow fonder.”
Ya’ know, stuff like that 
Well… now it just went back to today and says it is on a truck for delivery. Fed Ex embracing the 50/50!
The Seimitsu buttons don’t snap all the way in due to the thickness of the case w/ the plexiglass. Is there a more preferred button type for the Pazner case? thanks
I use Sanwa buttons and it go in perfectly
Hmm, ok thanks. The Seimitsu buttons stay in but i can pull them out with my fingernails, not a big deal…Good to know about the Sanwa buttons.
Be careful with the Sanwas though. Some of them aren’t machined properly. I had one in particular that I had to sand down the sides because if I put it all the way in the stick the button would get stuck down when I pressed it. Sanding it down on the sides resolved the issue though. But yeah…
Where’d you get those buttons? Are you sure they’re legit? I have installed a BUNCH of OBSF & OBSC snap-ins on numerous sticks over the years. Never had an issue with a single one of them.
Awwww yeah… it’s business time. [details=Spoiler]It’s business time.[/details]
Took a phone shot with different lighting, to better show the button color layout:
Nice Wallach! This Panzer is a beast!
So I was able to drill the hole with my step bit into the Hori RAP 4 Panel. I remove the KOF art and took the panel out. I sandwiched it between some cinder blocks and it drilled a perfect 35mm hole. I have a KOWAL universal plate coming on Tuesday (I was hoping today) but I was wondering is there ANY way else to mount a Korean stick on Japanese mount without that plate? This is gonna have to hold me until I can get a Korean Panzer and I’m impatient…lol. Lemme know please. Thanks!
Edit: Nevermind I used rubber bands to hold it in place.
Interesting, I haven’t had this issue. Then again, I haven’t used Seimitsu buttons on the top recently, only the sides.
Does anyone know if the EZ Mod will fit inside the TE2 with a fanta installed? It doesn’t look like there will be enough space, but I was wondering if anyone has tried it before.
Why wouldn’t it fit? The EZ MOD replaces the stock PCB and the Brook is tucked in the back corner of the case. I don’t have my Chun Stick with the JCC KE panel with me to double check, but it should be fine.
It looks like the quick connect would be resting on top of where the UFB would sit. Not sure if it would be touching since I would want to use PCB feet on it.
Hey Jasen, I’m thinking about swapping out these Seimitsu buttons for some Sanwa’s. While I’m at it, I wanted to see if it was possible to install some led or led kit that lights up the button when pressed, any recommendations? Thanks!