Korean brand arcade stick.
ooh that actually looks like a pretty decent case
Updates for the Panzer Fight Stick 3:
http://i.imgur.com/d2a7cK4.png
FAQs:
1.** What colors are going to be available?** Black, White, Gray, Red, and Blue Sandtex finishes during the Pre-Order Period only. After the Pre-Order period: Black and White.
2. Does it come with artwork? No, I decided to not include artwork as most people will want to customize it with fresh, unique artwork. Art at www.Tek-Innovations.com will have all of the PFS3 templates for custom etched plexi and lasercut artwork.
3. Is there a plexi window on the bottom? Not on this one. I wanted to keep the cost as low as possible to make it a robust, tourney ready stick with all of the qualities of the Panzer line you expect.
4. Do I have to use the included wiring board and wires? Nope. They will be included with every kit but you can opt to use your own wiring.
5. What is the size and weight? Its 14.5x8.5x2 inches. Weighs about 8lbs. This is the same size as the PFS-OG.
6. What are the screw sizes? External screws are all 6-32 threaded, 3/8" long. Plexi screws are M5 x 12mm. Feet Screws are 10-24 - 3/4" long.
7. When will Pre-Orders start? I hope to start them soon! Sign up for my newsletter at www.jasenscustoms.com as I will announce it there at least 2 weeks before Facebook or Twitter.
8. When will Pre-Orders end? Depending on the start date, around 15 November.
9. **When will regular, ready to ship orders start?**After all pre-orders are filled. There will be a hiatus around the holidays (Christmas specifically) and it will only be open for a short period due to follow on military requirements in 2017.
8. When will Pre-Orders ship? They will start shipping in December. I hope to have them all shipped out in time to arrive before Christmas.
9. What do I need to provide to finish the build? 8x 30mm buttons (all types fit), 6x 24mm buttons (all types fit), 1x Lever (Sanwa, Hori, Seimitsu all fit and an optical lever harness for the Silent Hayabusa and Silent JLF is included with every kit!). If you get the kit with the Brook UFB included, it comes pre-soldered! If not, you get the parts to solder to your own board.
*** THIS IS A KIT PRICE AND WILL REQUIRE SOME ASSEMBLY. I HAVE DONE EVERYTHING POSSIBLE TO MAKE IT SIMPLE TO DO BUT YOU WILL NEED A PHILLIPS SCREW DRIVER AT A MINIMUM. FULL BUILDS MAY BE AVAILABLE AFTER THE PREORDER PERIOD FOR AN ESTIMATED PRICE OF ~$319.95 (BASELINE SANWA JLF/OBSF BUTTONS USED)***
Any references to the exact shading to the blue, red, and gray colors? But this is really amazing and itās a great deal, so Iām really excited about preordering when the time comes.
More to follow 
One day, i will have a purple panzer
For us cheaters, can one of the front panel buttons be turbo? Iād still want L3/R3/Touchpad, so somethingās gotta giveā¦
Wtf 180?? Gotta get a red one!
Just wire up the Turbo button It will be a little soldering at the Brook UFB, but easy to do.
Is the plexi 1/16" thickness?
Will 6 buttons layout be available?
Is the asterisk by the Seimitsu sticks listed just because of the mounting height?
Yes.
Yes, a six button plexi will be available. The art, if cut with only 6 buttons, will cover them fine.
Seimitsu uses a 40mm x 85mm mounting pattern. I have used them in my PFS cases before and it fit fine, but it is different than the JLF so I wanted to highlight there might be some modification (very minor if at all) required of the mounting plate. The height may also be different if using a flat plate vs. an s-plate, or universal plate.
Jasen, do you have anything like a EZ MOD for the Hori RAP V3 SA that can make it easily usable with the Brook UFB?
Not at this time.
Jasen,
Whatās kind of metal case?
Thatās already detailed in the graphic above. Cold Rolled Steel.
Will this ever come back ?
http://i1164.photobucket.com/albums/q577/BPfivel78/4C2FA6E6-DC3D-4EA8-BB76-3BFACF9D701D_zpsog8wg52w.png
