Thanks! We have wireless for PS3 working now as well. I was testing it all last night with a lot of success and no lag. Next step is to turn the RX into the Wired PS3 board and then its super spec. The fortunate thing is that the wired coding is going to be drop dead simple now that the wireless is complete.
@Moonchilde - Cross Talk would only happen if there was another TX/RX set on the same channel. My testing revealed these worked a long ways… I was well over 50’ and it was working great.
The one thing the Morpheus got going for it is it using 2 units, a receiver and transmitter. its not directly pairing with the console.
Theoretically, if I ran a tournament with 30 console setups, and 20 of the players had a RX/TX set of receivers, would there be any issues if they were all playing at the same time?
I think the product would have more mass appeal if people could use their own sticks modded with this at tournaments.
I think there would be simply because of the range and that there are only 4 channels to choose from.
Just tested the wired ps3 firmware for the Morpheus, it’s awesome and very responsive!
Another simple yet beautiful PFS headed home to Florida!
^ That’s obviously the coolest case in this whole thread.
I want to order a panzer wide body and a crossbone, will you have a decent amount of those crossbones?
Sent you an order Jasen. Needed a Neo-Geo memory card sticker and ended up getting more goodies. You are the man for carrying PS-14-G even though I don’t need any at the moment.
<3 PS-14-G
Kyle,
I got it! I’m packing it up as we speak!
I’m going to try the Seimitsus in my HitBox style Panzer Fight Stick that @ogrebites is going to build up for me. Its a couple of firsts… first having someone build out a stick other than myself, and first time using Seimitsu in a build that I keep! I ended up getting some to have in the shop purely for the variety. If this stick works out as well as I hope, a few new builds in the future may get them as buttons as well!
Jasen
Flat tops get very little love these days.
I use them on my Naomi cab and used to put them on all of my sticks before I played on cabs.
Midnights: The floodgates open ushering in a new wave of Next Gen Fighting. Three Versions, you choose your battle. Special launch day pricing on XBONE Pads… hesitate and miss it.
You may be wondering how in the world I have XBONE pads at $29.95 now. Well, its not a long story nor is it complicated. I am a big fan of working to make our hobby affordable. It gets very expensive real quick when you want top tier parts. Anyone familiar with buying in bulk knows that the more you get, the more you save; and the more you look around the better deals you can find. I picked up the first batch of XB1 PADs from AkiShop Customs and sold them at cost plus PP fees because people needed them and I thought that it would be neat to see a PFS work on XB1. Why not? I have nobody to pay and no overhead. I dug around and befriended other vendors (shocking, I know) and we pooled some resources both financially and brain-powery to find a better deal on PADs. Cost average down and now, we can save everyone a few more bucks making an XB1 Mod even more affordable. This is a community, at all levels, and pooling resources is good for it.
It’s not a me vs. them game, its an us game. We’re all in this together, for better or worse. Make a friend, beat their rear in SF4/MK9/UMVC2 and have a beer!
Really cool how you guys are offering the Crossbone.
For anyone that hasn’t seen it:
Thanks Wiley! When Paradise and I were brainstorming ways to launch this to make it appeal to everyone, affordably, we came up with the STAGE idea. Kind of like cars and the various levels of tech applied. The higher the stage the more complex/better/easier to install.
I can’t thank @Phreakazoid and @armi0024 enough for working collaboratively on properly kitting these parts out and finding XB1 Pads at a good price so we could pass it along to the community.
Order between now and June 27 to pick your Powder Coat Color! To be a good steward to the shop and to keep the price of these panels as low as possible, I am going to send the first batch of Panels in on June 27th. This will allow everyone to pick a color of their choosing before white glossy is the only option! This will delay the orders going out briefly, but its going to benefit everyone that wants something a little more special.
Reproduction SEGA Control Panels now available for Order! Faithfully recreated by Jasen’s Customs using an actual panel, these are an excellent additions to your cabinet or custom project!
Construction Details:
Panels are made using 16 Gage Cold Rolled Steel. Same thickness as the original panel.
Powdercoated for the best possible look.
Astro City 2L12B Layout Standard
Studs installed per the JLF Standard. Use a Paradise Plate to mount alternate types of sticks like Seimitsu.
Reproduction Graphics are available for an additional cost. Custom graphics you provide are also available at a great price and installed before shipping! All graphics are printed on 3mil high quality vinyl, dried, and then protected with a satin finish 3mil laminate for durability. Finally they are machine cut and installed before shipment!
Cabinets these panels fit (based on actual fitmet):
Looking good, Jasen!
Any chance of 1P panels, or custom panels entirely?