I gotta wait a couple weeks for the 6 button panel + vinyl art… spent a lot on Christmas this year.
A final reminder for 2015 that the Pre-Order Period is closing tomorrow for the 1L8B Panels and that we’re almost there for the 1L6B Panels.
As voted on by the community, the #1 panel requested. The Sega 2P 1L8B Layout. Price goes up $10 after 1 January. Make sure you get your Pre-Orders in NOW to get them at the lowest price possible.
Art Template: VLX 1L8B Panel (2P Layout): https://www.dropbox.com/s/w3y3t8grrvdclox/Hori1L8B-2P.psd?dl=0
Order Link: http://www.jasenscustoms.com/Hori-VLX-Replacement-Panel--Sega-2P-Layout_p_70.html
https://pbs.twimg.com/media/CWebwOUWsAIWXii.png:large
Demanded by the SRK TT Community… Pre-Orders for the 1P 6B Layout. I’ll put them into production as soon as we hit 10.
Art Template: VLX 1L6B Panel (1P Layout): https://www.dropbox.com/s/qgtin5q4mcn7kir/Hori1L6B-1P.psd?dl=0
Order Link: http://www.jasenscustoms.com/Hori-VLX-Replacement-Panel--Sega-1P-Layout-6-Buttons_p_71.html
Current Pre-Order Numbers:
1L8B: 10
1L6B: 6
Sorry for the bump, to coordinate the launch of the new Brook Universal Fighting Board and this promotion I had to post while I was on my iPad at the right time.
The PFS-OG is back for a final run. To help spread the word I am running a sweepstakes! You are all familiar with these as I have done a few in the past and other retailers do them quarterly. Where this is different… you can get some really kick ass stuff for helping me out!
First:
Grand Prize: A fully built out Panzer Fight Stick OG using the brand new BROOK Universal Fighting Board and Paradise Arcade Shop’s OBS-MX buttons!
First Prize: A new BROOK Universal Fighting Board to install in your stick!
Second Prize: A set of 8 OBS-MX Sanwa Buttons courtesy of Paradise Arcade Shop! I feel guilty offering these as the winner will want to buy more as soon as they use them.
Next:
Everyone who orders a PFS-OG gets 25 bonus entries into the sweepstakes GREATLY increasing their odds of winning.
So, to be eligible… sign up below!
@“Jasen Hicks” Do you have an art vewlix template for the Panzer WB? I’m feelin some new art for the release of SFV.
I do on my main machine. I can send you a copy when I get home. Please shoot me an email or contact via the website so I don’t forget 
First few 8 Button VLX Panels are done! Just waiting for them to fully dry tonight so I can pack and ship tomorrow afternoon! These look pretty slick
Jasen, if I order a Panzer 2.0 today will it be easy to install the Brook Universal PCB that I have on preorder from Arcade Shock? Asked another way, are there any design changes you’re making to the Panzer 2.0 for the Brook PCB?
Regarding the Ultra Combo Finish run of the OG cases. The color options are only Black Sandtex or White Gloss. Is this for the entire stick, or just the bottom, and the tops will be the orange color shown in the picture? I ask because if we want custom artwork, you say to order a non-sandtex finish, which is white. The art templates are top only, leaving the stick with a white bottom / sides. Are there any options to have the bottom wrapped in black vinyl?
The 2.0 system of systems is 100% compatible with the Brook Universal Fighting Board. No plans on changing it to support extra buttons, yet. I have contemplated adding 3 more button holes on the opposite side for adding L3/R3/TP buttons. I think the next round of cases I make will have that done as I foresee more folks using the Brook board vs. the PS360+ going forward.
For the OG - Colors are Signal White (top and bottom) and Black Sandtex (top and bottom). I only had that one case to take a picture of at the time I created the ads and the promo. If you’d like a black stick, I would recommend the sandtex. Its my absolute favorite finish. Even over the wrapped ones I used to offer a bottom wrap, but with the way the case is designed and the vinyl properties when applied, the bottom was hard to get lined up and look as good as the top. Even when wrapped, there would be a case color visible. Another option is getting two! One black and one white, then you can have a cool pair of matching sticks! 
Could I pay a bit more to get those three additional button holes added to an order I make today?
Let me check my inventory this afternoon when I get home. If there is only one or two cases I can make an order of new ones that feature them cut out. If I have 5 or so, I have to sell those out first so I don’t end up sitting on a lot of cases.
Sounds good, thanks Jasen.
Thanks for the clarification!
I would get two, but I blew my stick budget when I decided that I just had to have ALL of the VLX Premium sticks. Importing a Red and Diamond from Japan was quite costly.
#1 rule of sales, Always try and upsell
I understand the collections costing a lot… totally worth it though! But seriously, the all black sandtex is one sexy case. Compliment with all black buttons, a black balltop, and black shaft cover… OMG!
White or Red ball top and buttons are also a consideration with the all black sandtex case
@airs good news! None on the shelf! I just ordered 5 from the shop to get made that include 3 additional 24mm holes on the case similar to the existing. There won’t be a PCB ready to install there so a traditional wiring harness will need to be made until I can generate something to make it a little easier, but you will have L3/R3/Touch spots now!
Excellent! I’ll be ordering today.
Two questions for you @“Jasen Hicks”: I’d like to go with an all black panzer 2.0. Buttons, balltop, everything. The example pic on your site has a black sandtex case but medium gloss panel. Is that because the black sandtex is irritating to have your hands on for long periods of play?
Secondly, is the Jasen’s Customs logo easily moved/removed?
The logo is standard. It is on every case. Similar to any other branded item. There is a very long backstory on why I did this, but its part of it permanently now.
The panel used was one of opportunity at the time no specific reason. I love the black sandtex cases. They are my favorite.