Hey AMB, did your friend have any response to doing wireless 360 hacks without triggers?
PCB received!
PCB, QD’s, and some extra wire.
Nicely labeled.
I don’t have time to put it together right now. Just wanted to say I’m pretty happy with this. Thanks AMB’s friend and AMB!
EDIT_______________________________
I did find the time to put it all together today.
I’m having issues with the guide button. The connection doesn’t seem to be very good. The button only works when I have the wire held in a certain position. I probably pulled it a little too hard when moving it from place to place or something. I don’t have the PCB mounted yet so maybe I can do something to make it better when I do.
Other than that, it’s perfect.
I am very impressed with the service AMB and his friend provided to me. It was extremely fast, I ordered my PCB from AMB on April 6th and received my PCB on April 10th. The PCB was packed very well and it looks very professionally soldered with all the wires labeled and they were nice enough to throw in some extra wire. I haven’t been able to test it yet because I don’t have all my parts, but I’m sure it’s fine, it looks very well done. I was also glad that AMB’s friend actually contacted me after I payed, the communication was awesome. Overall I had a very pleasant experience with AMB and his friend and I recommend this service to anyone and look forward to doing more business in the future! Thanks again AMB and his friend.
Wireless
Has he decided if he is going to do wireless? if so, how much
for wireless if i send the pads?
dont think he is doing wireless yet
wow, props to jared. He really pulled through. (jared is the friend)
Have your friend change the wire gauge he is using because the ones in that picture a few posts up are no good. Thick wire transfers a lot more stress to the joint when the item is being handled, eventually breaking the joint as we saw with the guide button only working under certain conditions.
I don’t know what gauge you used, looks like 18, but 24 will give you much better odds of keeping it in working condition.
Thanks for the positive responses and I am sorry about the guide button problem and hopefully it is not from a mistake on our part. Everything should have been working properly but if you think he had made a mistake, you may also contact him directly. You can also contact us for any other questions you may have.
We are not doing wireless at the moment.
Gamingnow: I doubt it is the wire itself. I understand that it may cause more stress, but I have no reason to believe that the wires he uses cannot natural wear and tear/pressure. I have a PCB with the same wiring, as well as MegamanDS the nintedno DS game, and we have not had any problem with handling the PCB. He also uses hot glue just for extra security. So as far as it being “no good” I disagree as long as it is reasonably being handled. But if for any reason you believe that we did not do our part, just contact us and we will try to get everything straightened out.
And last but not least, the second shipment of orders have been finished and should have been shipped out or are going to be shipped out soon. We are low on PCBs so we will be holding off for about a week until we get more pads in stock. You can still send us your own pads to be worked on. My friend has one more pad and I will give that opening to whoever contacted me first. If we come into more pads, I will let everyone know.
Also, it is best to contact my friend for the most immediate responses. I am just a middleman and because of my schedule, my contact with my friend is limited. But at the same time, you can contact me and I try to get in touch with him as soon as possible and make sure eveyrthing is going smooth. That is only for questions. All orders shold still be placed through me first so there is no discrepency about orders.
Thanks again and keep us updated with your orders and any questions you may have.
BTW, MegamanDS you still playing CVS2 or did you switch to SF4? MegamanDS is famous for doing combo videos in real life fights for anyone that doesn’t know. I once saw him do a 23 hit combo on a 40 y/o lady, a old man, and an old lady for calling him a chicken. “You’re a chicken, Danny. COoocooookachaaaaaa!!!”
AMB - PM’d you abou that last remaining PCB if its still available
Spots are currently open only for people sending in their pads. I have one pad that is on hold but if it not taken, the next in line will get it.
so if we ship our own pad to you, how does this work. do i send pad and paypal at the same time or do i wait just before ship? and when do u plan on having more pcb in stock? really interested in a possible bulk order. let me know
Very interested. PM me if I have a chance.
I’d like quick disconnects for japanese parts. Do Sanwa and Seimitsu use the same?
I’m interested as well, if theres an open spot sign me up!
There are opening for 4 PCBs. All necessary information must be included when you PM or I will ignore your PM and give it to the next in line. I am tired of people asking questions that have been answered multiple times. I am no longer going to chase people down 2 or 3 times because they leave pieces of information out.
If you do not know much about pads or sticks, that is fine and I am happy to help.
BTW, my friend can do 360 madcatz fight pads if anyone wants to send them in.
3 more pcb spots left till we restock.
sup brewsky!
seriously down for a xbox 360 common ground pcb with quick disconnects. also what would it take to have it setup for a perfect 360 stick?
willing to pay extra for this too! :bgrin:
hit me back
PM’d you.
Let me know how you want your pad GOLDN-NZ. We can cook it up any way you like it. I believe we just need to add the +5v wire for the P360 which should be np. Just pm and let me know if you want one. Think we might only have 1 extra PCB atm. Should have more but have to check stock.
Everyone else should have had their PMs responded to.
If we are out, we can always wait list you. 360 PCBs for all!!!
Plenty in stock. Let me know if you would like some PCBs.
Please include all information asked for.
Interested. PM’d.