WTS: Madcatz Wiring Harness - See Newest Post for item

Trading Outlet
1

http://i65.tinypic.com/zxwccj.jpg[/IMG]

Laser Cut Acrylic Cases

Selling put together plexi case shells. The case comes with all the screws already mounted so you just need to add your own buttons, joystick, pcb, art, and USB adapter. You can request them to be clear or you can choose colored paper to be inserted in the panels. Button layout of your choice. These cases fit Sanwa, Seimitsu, and most other arcade parts. Happ/IL will not fit.

The cases come together like a puzzle and then they are screwed together to make them structurally stronger. The inner structure plexi and parts are .220" and the art panels are .093". Art can be inserted all around the case and even in the inside or you can remove the art and go for the clean clear plexi look. Plenty of room on the inside to do wiring and it even comes with a plexi plate that has plexi spacers to mount Brook boards or a PS360+. I’m sure you can mount other pcbs on the plate but I specifically designed it for the brook/ps360+ board.

Price

The empty case is ---- shipped in the US. Includes colored paper inserts if you want or go with no paper and keep the case clear.

Add-ons:

  • Case + Pre-wire Setup - — shipped. The Pre-wire setup is me doing a nice wire up with a PCB (Brooke or PS360+). Price of the PCB not included, the price will depend on what PCB you choose. There is no mark up on the PCB, whatever the online parts store charges is what I charge you. The Pre-wire set up will look like the picture below. You will still be responsible for assembling the rest of case yourself. You can request the color of the wire and tech flex, I have most colors available.

[details=Spoiler][img]http://i61.tinypic.com/ajrswl.jpg

[/details]

  • Fully loaded case. This includes everything in the Pre-wire setup but you provide the joystick, buttons, art, USB adapter. I put everything together for you. The price is — shipped.

  • LEDs inside the case, add $30

Cases***

Case 1:

Case measures 17.5 x 9 x 2.75.

http://i66.tinypic.com/2jcslme.jpg

http://i66.tinypic.com/oapxy1.jpg

Case 2:

Case measures 17 x 9.25 x 2.75.

2

[details=Spoiler]SOCD Cleaner w/ Screw Terminals

Price: SOLD

IMP w/ Screw Terminals - SOLD

Xbox One Pad w/ Screw Terminals #4 - SOLD

PowerA Mini XB1 pad with screw terminals, and female B USB connector. Ready to drop into your case or for dual modding. Analog boxes removed for extra low profile, .75" in height, should fit into any case. The PowerA Mini pad also works on PC, PS3, and PS4(Legacy Mode ONLY) when you hold down either VIEW or MENU when plugging it in. I mounted the white LED from the pad onto the screw terminal board so you can see it function when using the pcb, the white LED is pretty bright.

Price:

PS4 Pad w/ Screw Terminals #6 - SOLD

Padhack SONY Dualshock PS4 pad with screw terminals, and female B USB connector. Ready to drop into your case or for dual modding. The battery has been kept so you can have the wireless option if you wish. Blue LED added so you can see it when the pad is “ON.”

Xbox One Pad w/ Screw Terminals #3 - SOLD

[details=Spoiler]PowerA Mini XB1 pad with screw terminals, and female B USB connector. Ready to drop into your case or for dual modding. Analog boxes removed for extra low profile, .75" in height, should fit into any case. The PowerA Mini pad also works on PC, PS3, and PS4(Legacy Mode ONLY) when you hold down either VIEW or MENU when plugging it in. I mounted the white LED from the pad onto the screw terminal board so you can see it function when using the pcb, the white LED is pretty bright.

Price: $80 shipped in the US

[/details]

PS4 Pad w/ Screw Terminals #5 - SOLD

[details=Spoiler]Padhack SONY Dualshock PS4 pad with screw terminals, and female B USB connector. Ready to drop into your case or for dual modding. Analog boxes removed for extra low profile, .75" in height, should fit into any case.

Asking $100 shipped in the US.

[/details]

Xbox One Pad w/ Screw Terminals #2 - SOLD

[details=Spoiler]PowerA Mini XB1 pad with screw terminals, and female B USB connector. Ready to drop into your case or for dual modding. Analog boxes removed for extra low profile, .75" in height, should fit into any case. The PowerA Mini pad also works on PC, PS3, and PS4(Legacy Mode ONLY) when you hold down either VIEW or MENU when plugging it in. I mounted the white LED from the pad onto the screw terminal board so you can see it function when using the pcb, the white LED is pretty bright.

Price: $80 shipped in the US

[/details]

Xbox One Pad w/ Screw Terminals #1 - SOLD

[details=Spoiler]PowerA Mini XB1 pad with screw terminals, and female B USB connector. Ready to drop into your case or for dual modding. Analog boxes removed for extra low profile, .75" in height, should fit into any case. The PowerA Mini pad also works on PC, PS3, and PS4(Legacy Mode ONLY) when you hold down either VIEW or MENU when plugging it in. I mounted the white LED from the pad since it was nice and bright.

Price:

[/details]

Crown Korean buttons and joystick - SOLD

[details=Spoiler]I found the following korean parts in a box that I would like to sell as a whole.

Buttons - buttons have never been used but they do have light scratching from being in a bag all together and rubbing against each other and the metal prongs on the bottom pcb.

  • 8 green
  • 4 red
  • 4 yellow
  • 1 blue
    Also included is a bag full of screw on rings.

Joystick- It’s a crown joystick I don’t know the model. It appears to be used. Missing the switches and screws that hold the switches on the bottom. I did find 2 deco korean switches and 2 gersung switches which appear used as well, I tested the switches using my multimeter and they work.

Asking $25 shipped for everything

[/details]

PS4 Pad w/ Screw Terminals #4 - SOLD

Spoiler

Padhack PS4 pad with screw terminals, and female B USB connector. Ready to drop into your case or for dual modding. Analog boxes removed for extra low profile, .75" in height, should fit into any case.

http://i59.tinypic.com/10df5gg.jpg

http://i58.tinypic.com/5mfy55.jpg

http://i59.tinypic.com/15zjl3c.jpg

http://i61.tinypic.com/awcfvl.jpg

PS4 Pad w/ Screw Terminals #3 - SOLD

Spoiler

Padhack PS4 pad with screw terminals, and female B USB connector. Ready to drop into your case or for dual modding. Analog boxes removed for extra low profile, .75" in height, should fit into any case.

Asking $115 $100 shipped in the US.

http://i62.tinypic.com/2edm70i.jpg

http://i58.tinypic.com/2we01mh.jpg

http://i57.tinypic.com/2n68m1.jpg

http://i57.tinypic.com/2reic07.jpg

http://i57.tinypic.com/vomu0x.jpg

http://i60.tinypic.com/2vjc4lf.jpg

PS4 Pad w/ Screw Terminals #2 - SOLD

[details=Spoiler]Padhack PS4 pad with screw terminals, and female B USB connector. Ready to drop into your case or for dual modding. Analog boxes removed for extra low profile, .75" in height, should fit into any case.

[/details]

PS4 Pad w/ Screw Terminals - SOLD

Spoiler

Padhack PS4 pad with screw terminals, and female B USB connector. Ready to drop into your case or for dual modding.

Asking $115 shipped.

http://i57.tinypic.com/1z6fjfd.jpg

http://i62.tinypic.com/nbq2ps.jpg

http://i62.tinypic.com/e6292r.jpg

http://i60.tinypic.com/qpgyso.jpg

http://i57.tinypic.com/b6bm0y.jpg

http://i62.tinypic.com/n33wj5.jpg

Foe Hammer Peace Maker Mirror Case - SOLD

Spoiler

Selling an 8 eight button Foe Hammer shell that has mirrored plexi top. Case is brand new.
L x W x H: 15" x 9" x 2.75", weighs about 5lbs.
Asking $100 shipped in the US. Make me your best offer including shipping and it’s yours!

http://i62.tinypic.com/2n7ljia.jpg

http://i62.tinypic.com/symrh0.jpg

http://i62.tinypic.com/34orjwz.jpg

http://i60.tinypic.com/206fmdt.jpg

http://i57.tinypic.com/33a5lc3.jpg

http://i62.tinypic.com/281x3r7.jpg

Foe Hammer DIY PS4 Stick -SOLD

Spoiler

The case and padhack are brand new they were both made last week.

The case has a padhack PS4 pad already wired up with RED LEDs. All the owner has to do is insert their Sanwa joystick, buttons, art, and neutrik USB adaptor. All the screws are already mounted for the joystick and neutrik USB.

Case color is red wine with red flake. It has a natural wood look to it but it’s paint. It’s looks awesome in person, hard to grab the flake with my camera.

Dimensions are (L x W x H): 16" x 10" x 3" and it weighs about 5 lbs.

http://i59.tinypic.com/15f5d94.jpg

http://i61.tinypic.com/2j2f7dg.jpg

http://i57.tinypic.com/nfpc1k.jpg

http://i62.tinypic.com/2qwkg8z.jpg

http://i58.tinypic.com/154d537.jpg

http://i61.tinypic.com/3096k3s.jpg

http://i61.tinypic.com/20jnur.jpg

PS4 Pad with Screw Terminals for Wireless or Wired Play

http://i61.tinypic.com/f3idti.jpg

http://i59.tinypic.com/1f8jsl.jpg

http://i60.tinypic.com/314duf7.jpg

http://i60.tinypic.com/jh3no5.jpg

[details=Spoiler]We have this giant 2-player case that is 42" long. Tossing this out there as a feeler to see if there is any interest in it. Doug built this a while ago and we never got around to doing anything with it.

So we are looking to either sell it as is or finish it off with all the parts, pads, and your art. PM me if interested with an offer or questions.

[/details]

[/details]

3

That thing is a monster! Looks cool.

4

Would be great for anyone making a Berserk themed stick!!!

5

Any idea what you’re looking to get for the 2 player stick? I’m interested but I would want it with the hole and plexi cut atleast

6

PM sent

7

Edit: Moved to first post

8

…hot damn.

9

That pcb is so tempting

10

Niiiiiice dude!

11

See first post for case.

12

Bump

Price drop to $130 shipped in the US

13

DIY PS4 Pad w/ Screw Terminals - See first post

14

PM sent

15

Your really talented in padhacks. You brought something new to the table I’ve never seen

16

Now, what I want to know is… how much for the dip/pullup station :wink:
Great job with those padhacks. I would definitely buy it if I didn’t have 2 PS4 sticks already.

17

@Yenjoi Thanks!

@poisonmar You can have the dip/pullup station if you can beat me in a pullup contest. :o

18

Foe Hammer Peace Maker Mirror Case is now $120 shipped in US.

I’d like to sell it by this weekend if not I’m going to wire it up sometime next week and put it up as a DIY with a PS4 padhack inside case.

19

What kind of wood is the Peace Maker case made of?

20

It’s stained poplar with a clear coat finish.