The cabinet is empty and does not have a monitor in it, the CP was taken off and area above coin mechs cut down to size to make room for new custom CP. (needs a lil extra work) Comes with a custom CP made by mameroom for sanwa sticks and buttons.
It is a two player control panel that is black (pictures will be taken) there is already 12 sanwa OSBF 30mm buttons inside, one sanwa stick (i had to part out the other to fix my stick) The spacing on these sticks is a little further apart than an astro city but has the SAME curve (stick and buttons have a larger space between them, not like… buttons have gaps between them)
The control panel like in the picture was removed and the sides were cut so that the new control panel could go on. One side was cut at a slant while the other was flat like required. Since i had no wood working skill i could not fix this.
Comes with a 21" PC monitor you can mount inside that has dual VGA inputs.
The wiring is for ps2 and also includes an ipac ready to have the wires screwed in. It runs off of a db25 printer cable + switch method for changing between them. Wiring is all labled and done by PAIK.
It’s a project i was not able to finish and quite honestly do not have the will to finish and don’t want it sitting in my parent’s garage and eventually get pawned.
Cabinet cost me 325$
Custom control panel cost me 180$
Custom wiring cost me 100$
I-Pac cost me 57$
Monitor cost me 30$ at the time
Buttons + sticks were about 70 (minus 1 stick so an extra 50 worth)
Total value: ~750
Willing to sell all of this for your new project… for 300$ OBO
Pictures upon request when i go home after finals (on the 18th)
This is NOT jamma ready
This is the type of cabinet it is. This is an example pic and NOT the actual pics.
This is local pickup ONLY, i am located in warwick rhode island about 5 minuets off the highway, bring a truck or LARGE van to put the cabinet in.
1 hour south of boston
3 hours north of nyc
