I would assume that the remote power-on is basically a firmware function of passively listening for paired bluetooth enabled controllers to broadcast that the PS button has been pushed so if Hori actually licensed the rights to use the DS’s bluetooth profile then remote power-on would be pretty much assumed.
The text in Ikagi-san’s image basically says as much that this is the first time a non-Sony controller can do this (for stress-free gaming at that).
If your link is correct, It would be the first time Sony allows a 3rd Party controller to do this.
oh yea i haven’t tested that, the ps3 isn’t mine its my cousin’s so i don’t know when i can test it, but when i do i will post asap
side note: i did however, read somewhere that it can
edit: some guy reviewed it here http://www.play-asia.com/hori-wireless-real-arcade-pro-v3-sa-paOS-13-49-en-70-6nb9.html
that it can turn on the system wirelessly
Hi
Has anyone bought this stick?
I got this imported to the UK from Japan. Costly with £40 customs/vat to pay on top.
It arrived yesterday.
I’m not happy with the cable door not really being attached to the stick.
Also loads of dust and dirt on it from new.
Other than that very good wireless stick. Looks amazing as well.
Anyone want to know anything about it, ask me.
Can you post some pics? I don’t really get the “cable door not being attached” part.
@Roddy I think he means that the cable door is easily removable… This is present in all hrap v3 sa/se models. Personally i think its better that way cause nothing can actually break, just pops on and off… I can take pics if ya want to see what i mean?
Oh, now I get it. My TTT2 is removable too, but I actually never had it to fall by itself.
I want put pictures up, but it does not seem possible from an iphone. Anyone know how?
Also about the stick I think it is the same as other hori sticks with the cable door never really fixed on to the stick.
I’m very keen to use the stick on pc using the bluetooth wireless mode.
I have motionjoy/ds3 tool installed on my pc which works with a normal ds3 pad with Bluetooth.
I’m hoping using this program will allow me wireless pc bluetooth play!
My only problem is de-syncing the stick from my ps3. I remember I has the same problem with a normal ds3 which needs to be unpaired with the ps3 before I could use the motionjoy/ds3 tool for wireless play.
To achieve this I used a pin in a little hole on the ds3 to unpair it.
However after finding this pinhole on the wireless hori stick on the right hand side of the control panel, the stick is still paired to my ps3. I tried a few times holding the pin in for a while as well.
So my question is, how do I unpair the stick from my ps3?
The instructions are in Japanese so I haven’t a clue.
Has anyone else had any success using this stick wireless on pc?
Any help/advice will be greatly appreciated.
Let me see if I can find the manual online. If I can’t, you can post some pics of the manual and I can translate or explain it to you.
Edit:
http://www.hori.jp/products/ps3/controller/wrap/img/img.jpg
I don’t think this has anything to do with what you are looking for, but since I translated it anyway, I’ll put it here. It’s about changing from Bluetooth to USB.
It says that once you press the reset button/change the switch from Bluetooth to USB you have to follow one of the following methods:
A) After changing the switch, wait one minute before connecting the USB cable to your PS3. That’s because even after changing the switch the stick still sends some data to the PS3.
B)Press and hold the PS button and turn off the stick when it asks you to. Then change the switch and connect the stick to your PS3.
I’m gonna look for the manual online a little bit more, but I don’t think I’ll find it.
Hey
Thanks for your reply. I think I will try what you translated for me. I have not tried those methods and it might work to de-sync the stick.
I’ll try this tomorrow and also try to post pictures of the manual as well.
Again thank you for trying to help me!
Ps. anyway to directly post pictures from an iphone on to srk?
I also want to post up my stick collection one day!
I really do like this stick.
I got the Hayabusa version of this stick. In Bluetooth mode, this is essentially a DualShock 3 in HRAP V3’s clothing. Miles ahead of the dongle-based wireless controllers for PS3.
ive been trying to make the bluetooth function on PC but have no luck,
(i have bluetooth adapter on my PC)anyway im still looking for a way to make the bluetooth mode work on PC… hope someone have any idea
wired mode works fine though, except for the never ending blinking of the red dots