Im getting a custom case made by ArcadePC.MX and was hoping to find a place that can cut me a black acrylic top for it. I’ve looked at FA Plexiworks and Tekinnovations but they don’t offer custom plexi. So if anyone has a go to place or person for such a task id appreciate it very much, thanks!
Surely Tek could do a custom acrylic if you asked. If you’ve got a suitable vector file (autocad is tops), it’s barely work for anyone with a laser cutter!
If you do have that file, look up local laser cutting. If you can’t find a dedicated shop, most place that do signage should have a cutter, or try a local fab-lab or maker space.
Edit: What about arcadepc.mx? They clearly have the cad files and the tools to do the work.
Tek-Innovations doesn’t do one-off custom cuts.
The builder themselves don’t offer plexi?
As a last resort, you can always buy a sheet of 1/16 acrylic/lexan, some 24/30mm holesaws/forstners/step-bits, and do it manually.
Try Ponoko, but carefull of shipping costs if you are outside the US.
Here in Canada, I used Umake.ca
Arcadepc.mx is providing plexi just not the black one that I am looking for. I found someone that could though thanks guys.