Which Seimitsu parts for tatsunoko vs capcom stick?

Tech Talk
1

Hi guys, I have two of these, modding one with sanwa, and I want to mod the other with seimitsu parts.

What stick will work with the connector, and what extra mount plate do I need for it to fit?

also what buttons fit?

I’m new to all this stuff.

2

As far as sticks go:

LS-32-01 Stock it will fit in. You may have to install plate 90 degrees of how the jlf was installed and rotate the pins so the face the outside of the stick like the original stick did. Also the harness flips in upside down.

LS-40-01 with SS plate. Same as LS-32-01 but needs the SS plate that comes with LS-32-01 by defaut. The LS-40-01 comes with a RE Flat Plate.

LS-56-01 with MS plate. Make sure the connector faces away from the center.

Buttons:
Any 30mm Snap in button will fit.

Any 30mm Seimitsu Screw in button will fit. For the button closest to joystick you will have to slide the nut under the mounting plate and screw the button in from top.

3

Thanks!