Wanting to turn my mayflash v2 into a hitbox

[Teddiedriver]

So my v2 is picking up dust at this point and I wanted to do something special with it but i don’t know where to start with it. any suggestions?

[Darksakul]

any suggestions?

Don’t bother, the Mayflash V2 does not have much room for that kind of mod.
You are also looking to completely replacing the top panel.

[MonkeyGovernor]

Spoken like a true Debbie Downer @Darksakul. Yes he’ll have to replace the top panel, but Instead of just saying why bother, why not assist with pointing in the right direction?

@Teddiedriver, you may want to reach out to @Biggz. He has a Venom PS3/PS4 joystick which is the exact same case as the Mayflash V2.

You can see here the new panel he cut, and the custom plexi top he had made, along with the finished product. Neither of these are terribly expensive if you have someplace you can do it yourself. It’s more of a time thing.

But maybe he’s got a template he can send you that you can have it professional cut someplace real quick.

[Darksakul]

Because all the people who offered metal top panels haven’t been seen on SRK in years. Forget plexy only solutions.
You going to spend more on missing that stick than it be ever worth.

You are better off getting a pre-made case that already has a hitbox layout.

Because sometimes someone has to deliver the reality check

[MonkeyGovernor]

Here’s some more info from @Biggz

Venom arcade stick PS4/PS3

This is some info I posted elsewhere in these forums, but it is worth being here too [list] [] £36 for the acrylic from Razorlab.co.uk. You can also use Ponoko.com, I think they’re exactly the same service and can get a price online before you place the order. [] £7 Zero delay USB board from ebay/china - I only used the wires from this, the pcb is not needed. Picture of these wires are below. You may not need this if you’re able to crimp 2.8mm spade connectors. [] £1.50 for longer s…

Venom arcade stick PS4/PS3

Plenty of room I think http://i.imgur.com/f3dG7eXl.jpg The UFB is thin, probably as thin as the existing PCB. The only problem I could see is where to mount it. The Venom’s bottom plate, which isn’t shown in the picture, is all metal so it couldn’t just sit on that. If you’re removing the existing PCB i’d look at mounting it in the same place.

He zipped up some template files as well:

The zipped file I uploaded to Razorlab can be downloaded from here

[jopamo]

You going to spend more on missing that stick than it be ever worth.

You are better off getting a pre-made case that already has a hitbox layout.

Because sometimes someone has to deliver the reality check

Truth /thread

Spoken like a true Debbie Downer @Darksakul.

“Debbie Downer”…LOL. Dude, how old are you? 70?

@Teddiedriver
Perhaps it’s time to go big? Jasen’s Customs and Allfightsticks have really awesome hitbox cases.

[MonkeyGovernor]

87 to be exact.