Yeah, the plexi sits flush but I still have to do work on the button cut outs.
I agree.
I just receive my samurai shodown artwork and itās AMAZING!
A HUGE thanks to Ruckage!
Iāll suggest him to all the people who need an artwork for their fighting stick!!!
Iāll post a picture of it as soon as possible!!!
Nice! Look forward to seeing it! My Sanwa parts arrived the other day but Iām not going to start the project until I get a custom artwork donāt want double back on work.
Here we go!!
@String_of_Asgard
Thatās come out really nice. Thanks for posting the photo, itās great to see the finished stick.
Did you have any trouble installing the art (I hope my instructions helped)?
Hi all! Hereās what I ended up, with the art printed and cut by ruckage:
And for the sake of comparison with the obvious inspiration:
Needless to say I am way more than happy about what ruckage did with the art!
Thatās sick!
Thank you and thanks again to ruckage 
Besides the art, what I really do enjoy (and wasnāt sure about before trying it) is the osbf-24 button with a black border and yellow plunger to replace the PS button at the top!
I was also considering trying to repaint the plastic case in white, but a virtua stick look-alike in a black suit turns out to look so neat I canāt even imagine to change it at all now 
Another huge thanks to Ruckage for the help. The quality is amazing. I couldnāt be happier with it.
https://i.imgur.com/dJHgdBg.jpg
https://i.imgur.com/l3o9Hz9.jpg
https://i.imgur.com/U1LXYFl.jpg
Wow! Great result with the art colors matching the buttons!
May I ask whoās the character from the art?
Itās a custom outfit for Eliza from Tekken 7
Also thank you for the compliments.
A PSA for anyone wishing to mod the multiplatform version of this stick (Xbox/PS4/PC). The front panel is not removable and is part of the plastic enclosure. Looking at it now, I shouldāve probably realized that since there are no screw covers visible on the front panel. I figured I might as well post this since I couldnāt find any teardowns/pictures of this versionās internals.
https://i.imgur.com/Ezx4k1j.jpg
All the connectors are clearly labeled in the PCB. Might check the SOCD cleaning (PS4 version was apparently L+R = L and U+D = U according to an earlier post) at some later point and edit my post to reflect that. I shouldāve actually checked the PCBās exact model, not sure if itās some commonly found variant. I would have purchased the PS4 version instead just to ensure moddability but they were sadly unavailable at the time and I really just bought it to check if stick is for me or not. I only really opened it to check if I could mod it into a hitbox which sadly seems impossible or at least prohibitively difficult.
Are you sure the front plate is not maintained by magnets? In doubt, you shall have a look at this disassembly guide: Newbie guide: Venom PS4 / Mayflash V2 Full Sanwa (/Seimitsu) Mod with Octo for Ā£116 [UK Pricing]
I have the same stick. Itās magnetic. Just apply pressure with a small screwdriver.
As for the hitbox mod, someone here posted one in this thread of the same stick. Check it out
The v2 and f500 are virtually the same.
Iāve got this one. Sure itās the same exact structure and all? Because I see no ridges or any indication of a second piece of plastic on the edges where the faceplate would meet rest of the case inside. Where did you apply pressure with the screwdriver?
Oh thatās wild. Looks like the f300 but doesnāt have a clear layer on top. Iām not sure. Maybe one of the other guys can help with this one? Itās smaller than the other venom stick as well.
Well, my bad, after googling a bit I figured out this should be your stick, with matching colors for buttons and all:
But yours surely has a smaller case than this oneā¦ Do you have any photo of its outside looks?