Venom arcade stick PS4/PS3

[K4Y]

Anyone else notice this problem. Once you insert the Sanwa OBSF buttons. It doesn’t click all the way down. The first stick the black and white buttons stick. You can see the first 6 white buttons showing the clip. And on the 2nd stick the last two red button showing the clip. Is anyone else having this problem. And some time the button does not respond not sure if this is due to this.

I think your buttons clipped on top of the artwork.

Ok will try taking the art off and see if that works now.

[K4Y]

When i put the art on top of the acrylic. It works and you cant see the clips. But when underneath acrylic you can see. Have no idea whats going on.

[Tensho]

Maybe your acrylic isn’t flush with the top metal panel? push it down then insert the button might help.

[K4Y]

Maybe your acrylic isn’t flush with the top metal panel? push it down then insert the button might help.

Just tried that. Still no luck.

[K4Y]

Just tested with their buttons and it works fine.

[sinetwo]

Mine didn’t exhibit that issue. Sure it’s not your buttons?

[K4Y]

Looks like i have found the problem. Its the buttons. I took the black buttons to the front since at the back it did not show the clip. And now its not showing. But what do i tell the company i bought it off. To get a replacement.

[K4Y]

Bought quite a few buttons. Will be testing all the buttons out now.

[K4Y]

Gonna send a email to Arcade World UK. Hopefully they send me some new ones.

[Microphonic]

To be clear, some of the buttons on mine do show the clip a little, they are a bit over the art and won’t clip 100% onto the metal panel. I honestly don’t care though.

[thesynapse]

Is there a way of getting this stick to work on xbox360 as well at all? Some kind of simple adapter?

[STEZO_ONE]

Is there a way of getting this stick to work on xbox360 as well at all? Some kind of simple adapter?

Check out brooks adapters.

[thesynapse]

They all seem to take 360 as an input, not an output.

[K4Y]

On the PCB board it has PlayStation and Xbox button symbol. Not sure if that means its plug and play. Don’t have a 360 now. Or else i would have tried it for you.

[K4Y]

To be clear, some of the buttons on mine do show the clip a little, they are a bit over the art and won’t clip 100% onto the metal panel. I honestly don’t care though.

So far all my other buttons clip on fine. Its just these white buttons. Hopefully i get them replace. Cause some time they don’t work for some reason.

[BLK_Taz]

hey guys i’m really intressted in buying this stick and modding it with sanwa parts
so i wanted to know if it’s precise when it comes to inputs (laggy) and if it’s smaller than a qanba q4raf?

[el_Principe]

Regarding the buttons’ clips showing, I literally rest my palm on the edge of the button, put my other hand over my palm, then lean down upon it with all my weight. After a few seconds, click

[Microphonic]

hey guys i’m really intressted in buying this stick and modding it with sanwa parts
so i wanted to know if it’s precise when it comes to inputs (laggy) and if it’s smaller than a qanba q4raf?

Its a little small than a q4, but i’ve noticed no lag

[Foghorn]

Hi all,

Quick question, does it matter which option from the below the stick should be set to? Or it doesn’t matter?

“LS” Mode - Joystick will function as the Left Analog Stick of a standard controller.•

“DP” Mode - Joystick will function as the Directional Pad of a standard controller.

Thanks in advance.

[Vrad]

Hi there, i may not have a lot of posts, but i’m a long time lurker here !

I found the artwork for my future stick ( the venom obviously ), and thanks to sinetwo i know how to mod it, the only thing i may have some trouble with is the artwork and the template …

Could somebody just photoshop it for me ?? it’d be really cool !