Undamned's USB Decoders (USB to JAMMA, etc.)!

[undamned]

I have a Mak Strike V3, I made the mod Undamned showed before and everything seems to be fine, I receive my couple of decoders a few days and today I´ve been testing the set up, when I turn on the super gun, the decoder directly goes to boot loader mode, Lights red & green flashing together,

I tried to push buttons to my controller but nothing happens. I do not press the decoder button to enter in boot loader mode, it does it alone, if I press that button, just the decoder do nothing, no lights, no input.

I use both decoders just to see if it could be a ‘problem’ of the decoder, and both do the same so i guess they are fine.

Any tip please will be welcome!!

By the way, the controller is custom one with a Xin mo board, it´s a chinese 1 player board that was very cheap, works very very well, and it´s been tested in Ps3 and worked just fine

Does the Decoder LED flash if you power up your supergun without your USB controller plugged in?
-ud

[edgb77]

Does the Decoder LED flash if you power up your supergun without your USB controller plugged in?
-ud

No, it does nothing, no lights at all.

[undamned]

Does the Decoder LED flash if you power up your supergun without your USB controller plugged in?
-ud

No, it does nothing, no lights at all.

Ok, then it sounds like there’s something about that controller that the Decoder doesn’t like. I couldn’t say what unless I had one in hand to play with
-ud

[edgb77]

Ok, thanks you

[douglam]

Hi, I just wanted to report that the ASCII seamic controller is unsupported and while it is supposed to be a PS2 controller, it is a USB controller that works on PS3 and PC.

[bootsector]

Hey guys! Is that possible to make this board to accept USB keyboards as input? I have a friend that only play games using a PC keyboard. So by using this together with the KADE miniConsole+ he will be able to play on consoles using a keyboard too!

So, is that possible?

[undamned]

Hey guys! Is that possible to make this board to accept USB keyboards as input? I have a friend that only play games using a PC keyboard. So by using this together with the KADE miniConsole+ he will be able to play on consoles using a keyboard too!

So, is that possible?

Sure it’s possible, I’d just have to add a driver for keyboard. I’ve actually had a few requests for this lately. I’ll put it on my To-Do list, but no ETA, as there are more pressing things to add.

Anyone wanna beta test XBONE support on one of their UD-USB Decoders?
-ud

[Jasen_Hicks]

I have a few decoders I can try it with Once I get the extra Brook UFB Ill get it in the mail to you as well.

[JedahsMinistry]

Hey guys! Is that possible to make this board to accept USB keyboards as input? I have a friend that only play games using a PC keyboard. So by using this together with the KADE miniConsole+ he will be able to play on consoles using a keyboard too!

So, is that possible?

Sure it’s possible, I’d just have to add a driver for keyboard. I’ve actually had a few requests for this lately. I’ll put it on my To-Do list, but no ETA, as there are more pressing things to add.

That would be amazing!

[FattyWinnarz]

It came out very well and I’m shipping it to Broly tomorrow.

http://i.imgur.com/JEba1b8.jpg

I did have a couple of questions though:
-Is it possible to change when the triggers will activate if i’m using a normal controller? they have to be pretty well pushed down for them to activate. it’d be nice if i could fine tune that.
-do you think a flash update to support xbox one or ps4 controller support is possible? i had a lot of interest from people who want to use their favorite controller for this type of mod.

Thanks!

Did you make him a green one?

Around 3:19 http://youtu.be/s1MYSgy4QMw

http://i.imgur.com/XWFDtJAh.jpg

[lunch_box]

When will more of the db15 be available? Arcade paradise are out of stock at the mo

[opt2not]

Just wanted to jump-in and report that these work great with the new Brook Universal Fighting boards when forced to X360 mode.

[undamned]

When will more of the db15 be available? Arcade paradise are out of stock at the mo

Shoot me a PM w/ how many you need, e-mail address, etc. I’ve got a few on hand that I can sell directly.

Hi, I just wanted to report that the ASCII seamic controller is unsupported and while it is supposed to be a PS2 controller, it is a USB controller that works on PS3 and PC.

Ah, ok, thanks! I had to look that one up!

Just wanted to jump-in and report that these work great with the new Brook Universal Fighting boards when forced to X360 mode.

Thanks for the report! Let me know if you have any other 3rd party PS4/XBONE controllers and want to do some beta testing of the latest firmware
-ud

[VietGeek]

Anyone still selling these? I need two (DB15 preferred but terminal version is fine too)

[SNKNEOGEO]

Hello… I am a Shmups member… I just created an account here because I am looking for 2 of the DB15. They are sold out on the online ships…

@Undamned - Can I the them directly from you as well… Please let me know… thanks

[kardus]

I’m looking for two DB15 encoders as well. Send me a PM if anyone has any for sale.

[undamned]

Sold out at the moment. Doing a minor hardware change on the 15 Pin Dsub version. Will hopefully have some built up next month, loaded up w/ the PS4/XBONE firmware.
-ud

[kardus]

What specifically is the hardware change? Wondering if its worth waiting for the new batch or if i should continue to search for a pair of these.

[undamned]

More resilient to voltage spikes. People using the MAK Strike, which can cause massive voltage spikes on the +5V signal of the controller ports, were damaging them.
-ud

[BurnYourEgo]

How’s the outlook on these for the DB15 to USB? Was hoping to pick up a couple by the end of the month.