Undamned's USB Decoders (USB to JAMMA, etc.)!

Tech Talk
21

Sweet another option, which is always nice. Will def pick one or two up.

22

I would definitely be in for two pre-wired to DB-15 for standard Supergun use.

23

Def interested in getting two for my supergun setup.

24

Iā€™ll be in for one for my PCB test bench.

25

count me in for two for my supergun, cant wait

26

Thatā€™s a great idea. @undamned you should be marketing this to those who do a lot of arcade board testing/collecting.

27

So is this for OEM ps3/xbox 360 pcbs? Could I use a P360+ on one of these without issue?

28

This should work with pretty much any PS3/360 controller (barring some button mapping differences). Thus far, the under-explored area is converters (like PS2 to PS3). I have a PS2 to PS3 converter that works fine, but some others donā€™t. Iā€™ll look into this for future firmware updates.

Should work fine. I think @eltrouble has used his quite a bit on UD-CPS2 without problems.
-ud

29

I can confirm that the PS360+ works flawlessly on the Undamned superguns. And yes, itā€™s meant for standard ps3 and xbox360 controllers. I think the only ones that have had issues working in the past were certain SFxT model sticks (ps3 versions).

Oh, and @Undamned , it works with a Hori Fighting Stick 3. Itā€™s an old and crappy stick, but it does indeed work, so you can add that to the list of supported controllers.

30

Thanks for the clarification, @eltrouble :smiley:

And Iā€™ll have to double check, but I believe that was fixed in the firmware update I sent out before The Fall Classic (which damdai tested beforehand and at that event).
-ud

31

I think I could have a better use for these than the CPS2 mod you do, would be down for four of these.

32

Same here. 2-4 of these would be golden.

33

Count me in as extremely interested! Been rebuilding my supergun for streaming and what not and can definitely use these to help test/use.

34

Just a random question, @undamned : have you tried these out with PS4 and XBO controllers?

Not to say that Iā€™d even need that functionality, Iā€™m just kinda curious as to whether theyā€™ve been tried or notā€¦

35

Iā€™m really excited to see what great things people come up with for these!

Iā€™ve not tried personally, but Iā€™m sure someone will soon enough.
-ud

36

Cool, canā€™t wait to buy one

37

Would these work with my supergun MAK strike? (connect straight to db15?)

If it will, put me down for 2!

38

I am sure a USB encoder designed for Jamma + Kickharness use will work for a DB 15 connector.

39

You need to find out how the MAK-Strike handles JAMMA+ (kick harness, etc.) This initial terminal block version Iā€™m releasing can certainly be wired up to work with that setup, but the DB15 version Iā€™m releasing later follows the pinout of Laughā€™s PS2 converter: http://etokki.com/PSX2JAMMA
-ud

40

The PS2 converter also is the same as the NEOGEO pin out, itā€™s really the only standard people use in their SuperGuns. Itā€™s the exact one I use in all of mine.