Uila LED wires come off easly

Hello, I am using Uila from focusattack.com to LED mod my arcade stick, I noticed that wires comes off so easly, for example if I touch the wire and give little bit of pressure it will just come off.

This is frustrating and I was wondering if there is a way to strenghten the wires.
I have added more solder, however it will eventually come off…please advise.

glue the wires in away from the solder point to reduce the stress being put on the wire when pulled.

What version of the Uila are you using?

I have plans to use the Uila Budget version since I don’t want to spend a lot of money in my first attempt and also I would like to use these connectors for a more clean and good looking job:


Maybe you can fix the problem with those connectors .

I am using this Paradise Arcade Uila LED PCB S Flash
I like what you are saying blow, I would also like to use those pins to avoid wires coming off

Here are the individual crimp connectors:

Since that Uila has the wires in different positions and you may find hard to use those crimps for 2 wires.