I was thinking about using mobo risers too
http://img.photobucket.com/albums/v298/cold-fusion/DSC03970.jpg
the holes shouldn’t have to be too big
I can also send it COD if you want…
that’s what i was going to do…
-joe
I’m still going to use this one for my PCBs…
http://i190.photobucket.com/albums/z244/jizzmirk/Arcade%20Stick/Thumbs/Adhesive_Mounts.jpg
Where are you going to drill the holes? on the side of the case? or the top?
I can’t seem to find these anywhere… i went to a few electronic part place and they don’t have it 
you only need a small hole… so you can do to the bottom side of the top panel…
-joe
I only found that accidentally in one of a small japanese shop (Daiso) here in SG… I bought 4 packs (8pcs inside).
I’m just having a hard time finding sandpapers here in SG with 800-2000 grit.
i can send you some sandpaper if you still cant’ find it by the time i mail your box
-joe
COD? Really?!?!
Here you go PPPP. Here is my discussion with tracer1 on how to mount pcbs. This is my test mount of axisdapter and cthulhu on mdf … I was afraid the mdf would be too ‘powdery’. But it holds just fine.
I used 3/32 bit and #3 6mm screws … you can prolly use the motherboard screws like chimster has in his pic. We are all computer guys and MUST have a ton of these lying around … :wonder:
motherboard riser are the way to go. I did the same in my box and im happpy!
Wow… that’s great… if you have 600,800,1000,1200,1500 & 1800 grits please send me 4pcs each. Include that to the boxes that you’ll gonna send to me… and also include that to my billing.
Thanks joe! :rock:
PPPP, Canadian pressure (arr4w, chimster, sillypuddy, gns) to use computer risers to mount the pcb’s 
j/k
Actually, I’ll just go through Paypal. I PM’d you a few days ago with my mailing address, could you PM me back with costs?
lol I can feel the heeeeat! :xeye:
My problem is I have to find the drill bits and risers/screws…I might have open up one of my older boxes and steal some! haha
my risers were leftover i had in a motherboard box. I had a milllllion screw but only 6-8 risers.
Daiso sells them? I’ll go check the one in Richmond here in BC. I’ll probably stick with the motherboard screw though, smaller footprint, looks cleaner.
that’s a lot of sandpapers, I’ve used 400, 600 and 1500 on my box.
i got them from Sayal electronics… $1 per bag of 10-15
-joe
@nuropa
Can you post your finished box? I just want to know how shinny it is on 1500 grit.
This is my first time I’ll be doing sanding, spray painting, creating quick disconnects… and also I created a Paypal account to buy things for this project (arcade stick).
It’s ok for me to buy more than having insufficient materials when I’m making my sticks. 
Name: Matt - chzoom
Location: Bristol, Rhode Island
Primer: Yes
of Boxes: 1
can i be added to the waiting list if people back out of this batch? Thanks :wgrin:
I used two MB risers to mount my madcatz retro pcb. made a couple holes and superglued them (the risers) down on the mdf. Holds nice.