Fantastic job man!!! Interesting to know that the Hori can be used as a ps4 pcb too.
But i ha ve 2 questions and i think that you, atrox modders canhelp me:
1- Seems pretty dumb, but how can i open the the opening logo button, to change the leds? I’ve tried hard but a feared to broke this part. Photos will help me a lot…
2 - Which ps4 pcbs i can use to mod my razor?
Thanx guys
If you haven’t done much soldering before, i think the easiest pad to hack is guilty gear xrd pad. Not sure where to get it (i had trouble finding it so i went with Hori fighting commander 4 instead).
I have a question. Is it possible to connect the Xboxone Atrox lock switch to the PS360+, and it actually work to lock the start, select and home buttons? Thank you. 
Alright so I already have my atrox modded with a ps360+ im just wanting to get the front LED working, any solutions? I saw someone did it earlier in the thread but never shared how to do so.
yeah, ghetto way would be to wire the switch to the ground of the start/select button (making sure that your start/select buttons are on a different ground to your other buttons)
Except that isn’t ghetto, its how its done. The Stick manufacturers has it all done as traces on a PCB instead of actual wiring.
Can you please tell me in some details how to do it? This is my first stick and I would like not to screw it up. Lol. It is the Xbox one model, and I’m just straight swapping into a PS360 pcb. I would love to maintain the lock switch, And have a little detail on hooking up the Guide button.
Well you are basically putting a switch on the ground wire going to the Start and select buttons
Flip the switch off and the start and select would lack their ground connection thus would not work.
I done a similar mod with the Injustice Stick.
As I haven’t messed with the Atrox Guide button PCB in a while I can’t show off the solder points.
I say cut the traces and solder directly to the switch, as for the guide button, I can’t help you any more than to say Use a multi meter and be ready to also cut traces.
If you’re asking about start select lock switch, then this is how you do it
I understand the theory, I was needing help on how to use the original Lock and guide PCB. Here some photos for a reference point. (Still Learning) :neutral:
That is where a Multimeter comes in.
It should be the bottom set of pins (if it’s anything like the xbox360 atrox
Thanx guys!
Anyone?
It looks like Razer signed another street fighter player.
Do you think those players at evo this year will be on custom Razer PS4 sticks? They can’t possibly use TE2s. Maybe Razer will announce a PS4 stick soon.
I find this hilarious, there never been a Razer product made for a PlayStation console before.
Would the Razer Atrox be customized? It really depends on the players contract with Razer, for all we know Razer only want these players to play on stock products.
Who cares any ways, the stick probability breaks mid match.
Hey so I put a ps360+ in my Xbox one atrox and I was trying to use the razer usb port
Does anyone know how to wire the razer usb port into the ps360+.
hello everyone I recently buy Razer Atrox Xbox 360, and i buy too pcb PS360+ for this stick
my question is : do i can solder Led players, home buttons + led logo razer (the button to open) ?
thanks again kinds regards
I haven’t used my Atrox (360) in about a month. I decided to fire it up tonight and it’s not turning on. I’m getting zero power to the stick (no lights, not recognized on 360 or PC). How can I tell if the PCB is bad or the USB cable is bad? It’s practically brand new.
Thank you.
@maxxreign - This probably won’t actually help, but if you have a 360 wired pad right now you could at least try swapping cables at the safe-detach point near the end?
I had a similar thing happen, as I mentioned earlier in the thread. I got in touch with Razer and they actually sent me a new cable entirely, which ended up solving my issue. I didn’t buy it from them, so it was a pretty rad move on their part. Maybe reach out to them and see if they will help you test things out?
Also, the reason I’m here: I bought an xbone atrox a while back as an extra stick to use on the pc, but I was annoyed that there were no drivers to get the trigger buttons working so I immediately re-boxed it. Now that SFV is going to be PC and PS4 I’m trying to decide what to do with my stick situation (my original stick is the 360 atrox). Should I:
What do you guys think?