ok I trimmed down some a little of the stripped wire and put them as far in as it would let me and still no power heres some.recent pics
ok so I figured it out and I should asked this from the start i have a ps4 lvt3 led board in my ki stick wich worked with the stock pcb so I assumed it would work as soon as I unplugged it from the ez mod board it worked fine. so is there a work around for this led board or Is it not going to work now.
Any plans on doing an EZ Mod board for the new Hori Fighting Edge? 
Did the TES+ EZMod ever get to market?
Does it matter at this point?
Hello, new to this kind of fight sticks. I ordered my first Panzer (a hitbox, used to play with my keyboard before, and wanted to upgrade!), but I have a super dumb question concerning the front buttons (not familiar at all with that, I need help on this):
I cannot find “eli5” explanation of what they do.
I did read here:
I also found
.
But I still can’t figure out them:
[list=1]
[] Select --> I guess like any game station controller.
[] Home -> I guess to show the Steam Big Picture mode when playing (and Pausing the game behind). Or the Playstation Operating system for what I recall.
[] Start -> Ok this one I guess it
[] AUX Button lock switch -> From what I read, it is to prevent to push all the front buttons accidentally. Hmm ok. all of them? Anything specific about it?
[] LS - DP - RS Mode -> Absolutely no idea what it is. It says “Shift directional inputs to support Left or Right Analog (LS/RS) Mode” on the picture but I still don’t understand. Is it for some specific fighting/other type of games? How does it work for a classic street fighter or the new DBFZ, any influence? how should it be set?
[] R3 -> Ok from what I read it is an extra button on Playstation, when the right joystick is pressed, got it
[] TP click -> What is that? ??? What happens is I press this button? That is the most mysterious button I can find here!
[] L3 -> Same as R3 for left joystick, got it.
[/list]
And what about the “Turbo” from the explanation above?
Anyway, any quick explanation from you guys would be amazing! Thanks again, so excited!!
Mid month.
You are confusing an EZ MOD with the Panzer. They are separate products completely.
The lock switch shits off all front buttons to ensure you don’t accidentally press one during play.
TP is Touchpad Click. It’s a PS4 button.
The LEFT STICK, d-PAD, RIGHT STICK function literally shifts how the directional buttons are displayed to the PC or console. Normall d-PAD mode is what you want.
I can’t reveal product plans at the moment 
Next up, the TES+ EZ MOD is officially available! You can pick one up on my site today. Its a full kit so no need to worry about soldering, etc.
Install video is here: Let's Build Something: TES+ EZ MOD Install with the Brook Universal Fighting Board - YouTube
Pick yours up exclusively at www.jasenscustoms.com
Hello Jansen.
Do you will sold any custom panel for Madcatz TE2+ anytime soon?
I’m looking for a complete “Type-N with 8 button” (metal panel + plexi) for my TE2+, but I can’t find this product in your site.
I will be yes. Since I am moving to Japan in about two weeks I have had to move shipping locations and split things up. The Florida warehouse, aka a spare room in a friends house, is getting setup right now. We have plenty of Type N panels available, just need to organize and inventory.
How would I go using this in and Atrox or is it not possible?
Hello Jansen.
Do you send to Brazil? If yes, I’m thinking about buy a Type-N for my Madcatz TE2+ and, at the same time, I’m worried about the transportation. Are your package secure for international shippment? I’m worried because the postal company here in Brazil is not a good one and is necessary to stay clear the package is extremelly fragile, for “security reasons”.
Another doubt is about the “[BLEMISHED]” condition of the panel. Can you show me some kind of image for reference about the problem?
Thank you!
I have a te2+ EZPZ
Plan to install a SIREN and MAGENTA soon
Can I use the power connector on the EZPZ for the Lvt3/generic LED to power my stick/Siren?
Do you have Jasens Ezmod or Gummos ezpz? If you have Jasens board then yes, you can. If you have Gummos board your sol as you cannot close the TE2 with both a Magenta and EZPZ, as the ezpz sits underneath the lever and prevents you from closing the lid.
If you have Jasens board you would plug the magenta into the ezmod and the lvt3 into the 2nd 5v port on the magenta. The siren attaches to the mode switching port on the magenta.
I have gummos board…till today I assumed they were one and the same. Thanks for the heads up.
So I can’t use a MAGENTA with it!? Wow that sucks. Hard.
So Jasens board will allow me to keep all the functions of my TE2+ as well as install a MAGENTA/Siren.
Guess I’m buying one.
That is correct. I went through the whole process you are doing now about a month ago. I prefer Gummos board as it does not use any wiring and is a cleaner install imo, but unfortunately it will not work with the Magenta.
I can’t find JASEN’s board for sale by itself. Everyone wants to bundle it with the Brook UFB…
Who is still selling it solo for the TE2+?
The only alternative is plucking the UFB off Gummo’s board, moving it lower and running some IDC cables to it. I’d need male to female IDC 2.54mm pitch cables AFAIK. Has anyone else done this?
I could also get some male to male couplers and buy female IDC flat ribbon cables.
I’d rather buy JASEN’s board.
If you email arcade shock they will sell it separately