I’ll be on a plane in about 29 hours; just to be safe, any orders after this point may not get sent out until the day after Memorial Day; all orders that have already been received will go out in today’s or Thursday’s mail.
Hey Toodles, you still want that Gamecube Hori pad at all? I’m looking to finally pick up just a regular Cthulhu and an Imp. Also have fun on your vacation, where you off to?
The easiest recommendation would be to follow Bomberman’s guide. It does involve a lot of soldering, but it’s the best and only tutorial for doing that mod currently available.
Yes, for the most part. There’s some drop from the MC Cthulhu diodes. So VCC voltage would be (Input voltage - diode voltage drop), where the diode voltage drop is about 0.2v through the black diodes and 0.6v through the glass diodes.
What I’d do in your place in get a semi heavy diode with a normal voltage drop of 0.6v or so. The small glass ones like the 4148 could work, but I’d feel better with one rated to handle well over 200 mA of current. Take a wire from the Cthulhu VCC, through the diode, to the input of your VPack. Use the output voltage ONLY on the p360/flash. The VPack will output the 5v needed by the stick, the rest of the boards will be running on the voltage given by the console, and the voltage going into the VPack will always be (Input voltage - MC Cthulhu diode voltage drop - VPack diode voltage drop). The voltage going to the VPack in the case of a 3.3v system:
3.3 -0.2 -0.6 = 2.5v
5v system:
5 -0.2 -0.6 = 4.2v
Just remind me of this post if you order from me and I’ll throw in a suitable diode.
I’ll be there late, so it won’t be my stick likely. But let yourself be known and people will have no problem lending sticks. We’re pretty good about that, especially considering your board is likely in a number of their sticks lol.
And I’m gone. All orders not already shipped and emailed out will be out on Tuesday (Monday is a holiday). I’ll have almost no internet access while I’m away, so please go easy on me. Please remember all shipment notices are sent to the paypal email address, so make sure to check it if it is different from your main email address.
I mentioned a little back that some of the custom’s numbers I emailed were missing a 7. Try:
LC76 0168 890U S
Sadly, the usps.com tracking never seems to go much further than that. Every one I’ve checked, well after the custom actually got their boxes, still said ‘accepted’. So please rest assured its sent and on its way, even if the tracking off of the customs number doesn’t change.
Sorry for asking, you get bombarded with enough questions, however I searched around for a bit and couldn’t find an answer.
I have a perfect 360 happ stick, and the 5v of power is my issue, is there a spot on the board that i can grab that power from? Sorry, first time stick builder so things are boggling.
Hey Toodles, sent you an order, I know you won’t be able to get to it (or probably even read this) till next week, but it’s cool. Hope you have (had) fun out on your trip.