@Drop One: I really like your work and artistic style. What kind of brushes do you usually use? I’m trying to find the right brushes, but I can’t seem to pick out any I really like.
Drop One is banned.
Welp. Could anyone suggest some of their favorite brushes then?
Too be perfectly blunt, your Princess Peach art was no different xD.
Drop One is a great artist but has a mean almost ridiculous attitude.
Oh haha, shows how much I read the posts as opposed to just glancing at the pictures.
Pretty much why he got banned.
im about to go to Kinko’s to print out my stick art, i have a plexi on top…What paper should i use?
I’ve read Lamilabel.
A premium thin sheet of Cardstock. Lamilabel is for people not going with a Plexi.
Thanks bro
And by premium I meant an 80lb to 100lb, high brightness, extra smooth surface. (Info was from Tek’s website because his prints are practically perfected)
One subtle difference… Bible Black is actually a hentai.
Not to be a nerdface about it, but there *is *a difference between ecchi and hentai.
Hi guys, quick question, i just picked up two wwe brawl sticks from amazon and i have a bunch of these buttons with microswitches
http://www.paradisearcadeshop.com/en/led-pushbuttons/230-red-led-convex-arcade-pushbutton.html
will these work ok with the wiring? On the microswitch, i’ll the connector on the old buttons indicate which is ground and which goes to the pcb?
Wiring wise you won’t have an issue.
thank you, do the wires indicate which is ground and which is positive?
Assuming the wires are still connected to the PCB, it doesn’t matter which wire goes to which connector on the button. Buttons have no directionality, they just close the circuit.
(Also this isn’t the best thread for this, this is an artwork thread…)
Hey guys! I just posted this in the “Check Out My New Arcade Stick” thread before I saw this Art thread. So I figured I’d share here too!
So far I’ve:
-Dual Modded it (TEKitty Mod)
-Added felt to the bottom
-Changed out the buttons
-Replaced the art (Golden State Warriors washer and San Francisco HUF Skyline)
-I want to add a blue bezel, but shipping and handling is just as much as the bezel from the GameShark store 
http://farm8.staticflickr.com/7088/7256747688_35a6365c2f_z.jpg
http://farm8.staticflickr.com/7072/7256747270_bb6e523320_z.jpg
My TE stick was fine the first week, but after about a week or so, I noticed this at the edges of my art, anyone have a way around this? Any help is appreciated!
http://farm8.staticflickr.com/7227/7256747456_cfa7012117_z.jpg
ok, heres an image related question. When i click and save as one of these images, they show up REEEEAALLLLLY long and stretched out? This is for the brawl stick
when i save them from the thread.
Click to enlarge, right click, save as