:u: Thanks, didn’t realize I listed the wrong part. Updated.
Oh and the pics were taken after I had modded the stick already, I have a note about it before the instructions. =D
Thanks man exactly why I came here. Very good job.
Thanks man. My broke @ss can’t afford the TE.
So if we want to go all sanwa the joystick we would need to buy is the one for 24.95 on lizardlicks? It is a JLF-TP-8T, i dont know if thats the same as the onoe you posted.
Since Lizard Lick is getting totally hammered here another place to buy parts is Gremlin Solutions in the UK http://www.gremlinsolutions.co.uk/arcadeparts.htm (Scroll down for Japanese Parts)
A few questions relevant to this thread have occurred to me though, what size are the Start - Select/Back buttons? 24mm, 30mm, 1.125" or something else? Would Happ’s player imprint buttons fit back there? If not, whose? I imagine several people would like to make that swap for aesthetics. Though perhaps a stencil on the stock would be an easier way to achieve the effect.
On the same topic, how does one go about connecting to .187" terminals with the provided wiring?
I’m wondering if there are any Happ parts that can fit in without serious work.
buttons are too tall to fit in correctly. need about another half inch.
for those who own one of these, how heavy is the stick?
I was afraid of that. Also I’m pretty sure getting a Happ stick in there would be a nightmare. Is there anything out there comparable to Happ parts that WOULD fit in?
EDIT: I should clarify a bit, I want a stick with a bit more tension in the springs than the stock SE one, but not sure if Sanwa or Seimitsu will be a big upgrade as far as that goes.
As far as buttons I have a thing for concave buttons.
24mm. Happ will not fit. You could try a clear Seimitsu button with art under it. Sanwa/Seimitsu do not have the US-style player imprint on any of their buttons.
stick is of some pretty good weight, its not like the HRAP but its up there.
Can the standard non-upgraded stick take a restrictor plate? Or do I need to replace the stick to add a restrictor plate? Specifically I’d like to fit the stick with a 4-way/8-way plate so I can switch between stuff like Pac-Man CE and fighters/shooters.
yes you can add the octoganal that would fit the jlf.
So the stock stick is basically a JLF knock-off?
Artwork
A noobie question about the artwork in the official thread. Are they all for TE sticks unless otherwise specified or can they also be resized in some way to fit SE sticks?
Sileighty sucks at Street Fighter Confirmed!
And wait you need to add my Light up bubbletop mod to this :),
Yo can I have some shots of the pcb? and do you know where the 5V line is ?
No, there are specific templates for both sticks on the very first post of that thread. I recommend reading them. They are there for your use.
The +5V line is the red wire coming from the USB cable. It’s also labeled on the PCB.
How about I slap the taste out your mouth?
oh noes internet tough guy, he answered your question dumbass, no reason to get all hostile.