Oh you tease!
If all goes as planned tonight, I should have my VLX Kuro tomorrow morning, and some less-than-exciting opinions to share. 
So Iāve now found the correct thread for the VLX!
http://i.imgur.com/m1ZoCbn.jpg
Only problem is itās not a thumb screw.
The size Iām told is 6/32 UNC 8mm thread length
Now to try and find a thumb screw of that size.
Iām missing mine too so please keep us updated if you find where to order them.
If you canāt find the thumb screws at a local hardware store you can get them from mcmaster.com or grainger.com if youāre in the US.
After reading all twenty nine pages, Iām taking a plunge on purchasing a VLX Kuro! I like the simple monotone black look over the Hayabusa. Iāve been a Hitbox player for the past four years and will be switching over to a stick! I will update yall when my stick arrives!
Why? Get a HITBOX Panel!
http://www.jasenscustoms.com/Hori-VLX-Replacement-Panel--HitBox_p_107.html
I promised a video tonight. It just finished uploading and processing so itās not quite in HD yet. Enjoy the video thatās approximately 20 minutes longer than the actual install!
Priceless
And with the Brook board screw terminals free, you could dual mod the Brook board with something else for even more compatibility.
Liked the video! BTW how bad is the lag/latency on the Kuro/Hayabusa?
[quote=āJasen_Hicks, post:1447, topic:174014ā]
Wow. It looks fantastic. I canāt wait to order It shall be mine
Iām content with the current solution Iāve got.
Iāll throw in a mini phillips head screwdriver in the cable compartment slot.
This is the closest I can find from Grainger.com
I spent most of the day trying to find the closest thing and the two that I found are as follows:
eBay 1 - length wise, itās pretty close to the 8mm that Hori told me, however it doesnāt have that extra part on the thumb screw
eBay 2 - I think this is the closest thing you can ever get from the OEM, only problem is, this guy doesnāt ship to Australia 
quote=āJannodude;10674845ā]
Liked the video! BTW how bad is the lag/latency on the Kuro/Hayabusa?
[/quote]
It doesnāt matter, and there is no quality test to quantify it anyways right now. Donāt jump on the latency bandwagon, its a dangerous path.
Thanks! Iāve read up on Teyahās latency test and the VLX Kuro almost have a 1 frame delay. Not sure if this is noticeable IRL. Do others notice the lag/affecting game play?
So I picked up my VLX Kuro from my parentsā place this morning (I get all my online orders shipped there), and tried out a little bit of SFV on the PS4 on it.
My quick thoughts:
- Nice and heavy, definitely the best retail stick you can get;
- It does have a bit of a hollow-sound when playing on it, at least with the stock Hayabusa and Kuros;
- Itās surprisingly not as big as I kind of imagined it to be; for some reason I was expecting it to be another 20-25% wider;
- I wasnāt expecting the full foam/cushion bottom, so the stick as a whole is just fine for lap-play;
- Will probably swap out the stock parts sometime (Iām more of a Seimitsu kind of guy)
Canāt wait to pimp it out with the awesome stuff Jasenās releasing soon.
Put 0 stock in his poor testing. A while ago @Toodles completely debunked his entire method and nobody with any understanding of electronics puts stock in his results. There is a reason that PCB latency tests are not conducted by anybody credible.
Thatās reassuring, I almost scrapped the whole idea of purchasing a Vewlix because of his data/findings. I will proceed with my order! I appreciate it Brother!
That lag thread is a house of lies.
I am really enjoying my GGXRD pad in my VLX!
It almost got me!
You wonāt be disappointed. Almost got me, too. Thank you, Darksakul (and Moonchilde) for holding shit down. I absolutely love my vlx and have no problem wrecking people with it!