I’ve got a Happ joystick and found the spring strength a bit heavy. So,
-
can you make it lighter without changing the spring? would cutting a bit of it help?
-
if I have to change, how should I choose a new spring? with thinner metal?
unless you’ve changed it before, or someone else has, i believe the happs come stock with a light spring; so if it’s a bit heavy; i dont know that you’ll find anything lighter unless you move to a japanese stick.
sory no EN
http://www.kowal.itcom.pl/ArcadeParts_pliki/artSP.htm
it was one should warm spring
do not burn spring, spring should not alter colour (on white, grey)
fire has to go on metal washer
for iL spring
you need 2 big washer diameter 45 or 50mm, 2x nut M12, screw M12
first control burn 1min
http://kowal.itcom.pl/foto/artSP-Z1.jpg
http://kowal.itcom.pl/foto/artSP-Z2.jpg
http://kowal.itcom.pl/foto/artSP-Z3.jpg
http://kowal.itcom.pl/foto/artSP-Z4.jpg
KC-04 (or competion) after 1,5mm and wico hard spring after 3min
http://kowal.itcom.pl/foto/artSP-Z5.jpg
and never us this method, you broke spring
Kowal’s mad helpful
woooooow