Soldering Services - Cthulhu, Chimp, and other Electronics

Trading Outlet
1

Offering my soldering services for any type of electronics need you may have.

You send me your stick with a Cthulhu/Chimp and I’ll wire it up for you.

Price:

$50 + shipping for all Cthulhu+Imp/Chimp installs. You pay all shipping costs. If you want to find out the shipping price my zip code is 80920 and thats Colorado Springs, CO.

NOTE- I’m not doing MC Cthulhu at this time too much of a hassle.******

If you want an MC Cthulhu or any other device installed PM me or post here with what you want done and I’ll quote you a price.

I always take pictures of my work so you can see what you’re getting from me.

**Samples of my work **

Chimp

http://img.photobucket.com/albums/v702/stevedjm/DSC01931.jpg

http://img.photobucket.com/albums/v702/stevedjm/DSC01926.jpg

Cthulhu 1

http://img.photobucket.com/albums/v702/stevedjm/DSC01916.jpg

http://img.photobucket.com/albums/v702/stevedjm/DSC01911.jpg

Cthulhu 2

http://img.photobucket.com/albums/v702/stevedjm/DSC01892.jpg

http://img.photobucket.com/albums/v702/stevedjm/DSC01897.jpg

http://img.photobucket.com/albums/v702/stevedjm/DSC01906.jpg

Cthulhu 3 in SE Stick

http://img.photobucket.com/albums/v702/stevedjm/DSC01864.jpg

http://img.photobucket.com/albums/v702/stevedjm/DSC01866.jpg

http://img.photobucket.com/albums/v702/stevedjm/DSC01870.jpg

http://img.photobucket.com/albums/v702/stevedjm/DSC01878.jpg

Cthulhu 4

http://img.photobucket.com/albums/v702/stevedjm/DSC01851.jpg

http://img.photobucket.com/albums/v702/stevedjm/DSC01853.jpg

http://img.photobucket.com/albums/v702/stevedjm/DSC01861.jpg

2

Nice, looks very clean and aesthetically pleasing!

Do you hack Madcatz 360 pads (with or without triggers?) ? *If so, please send me a quote of 360 pad + MC Cthulu --> RJ45 mod. thanks !

*- (to know for a possible future order)

3

PM sent

4

Very Very Neat. :smiley:

5

Insanely neat wiring. What gauge wire is the ribbon cable you use?

Also, $40 is a steal for that level of neatness and attention to detail.

6

Agreed. This is the cleanest wiring I’ve seen on the site. It looks like it was commercially done. I would personally charge more if I was this obsessive.

7

Thanks for the compliments.

Its actually not ribbon cable, its regular 30 AWG kynar wire, there is just a trick to get it to look like that.

8

Can you pre-wire a led kit and a dual mod (hacked 360 pad and a MC Cthulu)? So all you have to do is drop it in the case and it’s ready to go! Dual modded with leds. Just curious cause that would be awesome!

9

Wax coating maybe? Looks like Bendaroos hahah

10

EJM linked that this is how he do.
http://ccwiki.psx-scene.com/index.php?title=Installing_Your_Crystal_Chip_in_your_slim_PSTwo

11

I like how in some of his work, he stacks the pcbs on top of each other, this might make room for dual pcb + imp in a smaller case, where there wouldn’t be room otherwise :]

12

Wow, that is almost art right there, seriously.

13

These are absolutely beautiful. I may hit you up for some work in the future…

14

Can you hack a wireless 360 pad? If you do let me know how much including shipping it back. Thanks

15

Yes, I can do the wireless 360 pad. The price would be $40 + shipping, you provide the pad, my zip code is 80920.

16

Wow! that is beautiful wiring right there. I would keep a see thru lexan on my TE just to show it off.

I have a PS3 TE and a 360 TE.
From what I am reading, it is easier to start with the 360 board to dual mod. Is that right?
Are you able to get all the parts needed for the mod? If not, what will I need to order and send out to you?

17

For the 360 TE you would need a Cthulhu PCB + Imp board or a Chimp PCB (New combined Imp + Cthulhu)

18

hey EJM sent u a PM.

also, do you test them once they’ve been wired? just curious

19

maChubbyBeaver, here’s your mod, tested and working.

http://img.photobucket.com/albums/v702/stevedjm/34yb9k8.jpg

http://img.photobucket.com/albums/v702/stevedjm/14j4zte-1.jpg

20

AWESOME!!!

Wow that looks just amazing to say the least…Thanks so much EJM

All I have to do is solder my USB cable to loose ends right?