Haven’t used it in a little while plus car work = Egret II for sale.
This is one of the cabs from the SE Neo-Geo Egret II order.
Has repo 100 yen sticker, repo instruction space, AW marquee holder, new buttons (Sanwa) and sticks (LS-32-01 on might putty, meh if you want to remove the stick get a scraper and a hammer and it’ll do the job) and last but not least all the keys for the cab.
The cab is in good condition for the most part but it’s not mint. Does have marks on the left side but shouldn’t be too bad. Right side is much better with little marks on it. I consider it gamer’s condition. Great if you just want a good cab to play games on.
CP is Neo-Geo style panel. The cab is great for MVS stuff but if you want to go to the Capcom route you must either drill more holes on the panel or replace the panel with a Capcom style. The cab is great for JAMMA games. If you want me to add in the fourth button for MVS I can do that free of charge.
The cab has a MS-9 in it which is amazing for the color quality. I must say that there’s a slight geometry issue on the bottom right of the tube but it’s not major or anything. Every Egret II with a MS-9 has the same problem. The best thing about this cab is that there’s a rotation mech built in so you don’t have to take out of the tube when rotating it. Of course I must say that there’s slight burn in on the cab but when playing it you don’t notice the burn in at all. This cab is great for shmups if you’re planning to keep it in TATE. If you want to MAME it then this is a good cab to do it on.
The cab can play low/med rez games, but not high rez stuff.
Will also include two stools which are the perfect height for the Egret II.
SOLD
Located on the UNF campus and the cab is up the third floor so bring a friend or two to get the cab downstairs (if you can’t get anyone I can try to get people to help you out). Interested people can stop by and bring anything they want to try it out. I have no JAMMA boards for it so bring your own. PM me for more info and if you want to contact me via cell I can give you my cell info.
Pictures:
http://img688.imageshack.us/i/tnpicture012.jpg/
http://img156.imageshack.us/i/tnpicture013.jpg/
http://img140.imageshack.us/i/tnpicture014.jpg/
http://img156.imageshack.us/i/tnpicture015.jpg/
http://img687.imageshack.us/i/tnpicture016.jpg/
http://img249.imageshack.us/i/tnpicture017.jpg/
http://img688.imageshack.us/i/tnpicture018.jpg/
http://img687.imageshack.us/i/tnpicture019.jpg/
Shipping:
I have no problems shipping the item anywhere to the USA or Canada but shipping arrangements must be done by the buyer. I would need help getting the cab downstairs to the first floor and getting it wrapped for protection. I will make sure it’s 100% working before shipment but once it’s out of my hands it’s between the buyer and the shipper if anything bad happens. People like using NAVL as a shipper so I would recommend using them, but you can use any shipper that you choose. Cab info is that the item is around 240 pounds and has the est dimensions of 750 x 903 x 1450 mm (1765 mm including Marquee) (dimension info is from Hard–candy.com). Also the item is on a college address (zip is 32224) and needs help getting the cab downstairs and help warping it up.
Also I would recommend shipping the marquee holder, the keys, and extra goodies separately. Now I don’t mind shipping this to Canada but once again all shipping arrangements must be done by the buyer and any duty/custom fees is the buyer’s problem, not mine.
I’ll definitely let you know if that changes unless you sell it beforehand, cause I’d LOVE to have this cab…why in the bloody hell can nobody who wants to sell a cab at an awesome price EVER live near me?:sad: