Have a PS360+ and am trying to use it with SNES/SFC. The firmware is fully updated, so it SHOULD work, yet it doesn’t. It’s not the cable that’s crimped, because the same cable works with two different MC Cthulhu sticks.
Is there a different pinout, or something with the PS360+ firmware itself?
Could be the diodes going to the RJ45 jack?
Diodes on the PS360+? Wouldn’t that make it not work on other systems as well? It works on Supergun perfectly fine going through UD-USBs.
Can you use a PSX Cable on your board? if yes then 7/8 rj45 lines are working.
IF you can use USB via RJ45 then all of your lines are working.
Try using a multimeter to check everything related to your SFC Connector and RJ45 Jacks
That was an issue on one of mine
We’ll give that a shot. See what happens.
The PS360+ in question has been swapped with a MC Cthulhu, but someone else is bringing a PS360+ soon so that we have extra SNES sticks, so I’m gonna have to check and see if that works. Figured I’d ask beforehand now.