Maybe I’ve been asking the wrong questions so I hope these questions are the right ones. I’ve looked over the forums about Modding a Street Fighter 4 Madcatz fightpad and been looking for answers on solder points. One question I would like to know is that I notice that most mods don’t have each pushbutton grounded off pad. How would you ground the buttons? I have a total of 12 buttons to ground so what would be the best approach to grounding multiple buttons off one source? I have 4 white LEDs with a FW supply: 3.3V - 3.6V Max with FW current 25mA to also power. Will I need to use Resistors for the 4 LEDS? * have some 10K-Ohm with a 0.50 watt-5 tolorence if I need to use them. I want to also make the turbo feature possible so I brought some small pushbutton that I plan to drill a 0.5" hole for it. I basically have just about everything thanks for the info here and just need the help with my final stage of the mod. I will post the complete MOD once done. Any help would help. Thanks
LegendayGamer