Hi all,
Has any one have experience with these Zippy switches it does states that it is for the LS-32 however ive read that people use it on the LS-58 as well. Link:
Does this kit change the short throw or actuation of the LS-58 i do like the feel of the LS-58 but its loud man specially at night. Is the kit also compatible with the LS-40?
Lastly what is the specific type and partnumber of the above switches?
Your feedback is welcome
[ive read that people use it on the LS-58 as well]
It doesn’t fit on 58 unless you cut off the levers.
[Is the kit also compatible with the LS-40?]
yes
Thank you for the reply,
So i found the link to which some one stated that the zippy switch does work on the LS-58 BUT…only with the square gate it will not work on a octagonal gate link: (4th post)
http://forum.arcadecontrols.com/index.php?topic=148035.0
Good thing it works on the LS-40 any idea it will change the throw or actuation since i do cherish those attributes in the LS-58 and LS-40…?
I see.
Well, you can actually fit a zippy switch on both joysticks but not the same model due to the length of the switch levers.
LS-56,58,etc
LS-32/40
Throw is the distance from neutral till restrictor so switches has nothing to do with, actuation can change if the new switch’s actvation is faster or slower than the original. Please, note that the bent levered ls-32 switch refers to the newest model, if you have a earlier version the lever is straight.
Thank you for the reply,
Yes i made a mistake regarding the throw its been awhile since i used a stick.
Going to order the Zippy switches and ask for additional “levers” if possible as i recall the that thread link they do advise for additional levers when ordering the zippy switches.