Rollie Electronics - Rollie Translucent Pushbuttons 24mm or 30mm $1.00 each

Tech Talk
1101

Pic Posted

Ponyboy

1102

Yeah, those are nice. Thanks.

1103

Yeah, can you list what microswitches fit in these.

1104

No purple? :frowning:

1105

Thats pretty cool. Would it still feel like sanwas?

1106

The micro-switch is very similar to the SW-68 it measures 15mm x 12mm. To me the feel is very close.

Ponyboy

1107

I think I will have to get some of those.
Stay gold ponyboy
:lol:

1108

If anyone needs to order please contact me at:

jpipp@ymail.com

Thanks,

Ponyboy

1109

Just to let everyone know the Sanwa micro-switch does fit the Rollie 30mm Translucent Pushbuttons.

Thanks,

Ponyboy

1110

I just got the Rollie 30mm in the mail today. It feels very good with the Sanwa micro-switch in there. I was also very happy with the look and quality of the button. At $2.25 I will def. be buying more.

Thanks Ponyboy

1111

Any opinion/comparisons to other buttons you’ve tried, translucent or not? How’s the size of the plunger, is there any wobble of the plunger in the main housing, anything else?

1112

Did you put those Rollies in a plexi? I was wondering about the fit, would any sanding be needed to make sure you don’t crack the plexi? I’ve seen people crack them with Sanwa snaps.
And how would you say the stock switches feel? If they’re better than Madcatz quality it might be worth keeping them in. I’d be curious about how they are long-term.

Damn, Toodles beat me to that last part by seconds.

1113

I’d say the action feels a lot like a OBSN. The plunger fits great, very little wobble (maybe less than the OBSN i took the micro-switch out of). One thing I noticed is the plastic clips that hold on to the control panel are much stiffer on the Rollie compared to the OBSN. I did’nt have any Seimitsu snap in’s to compare it to. Maybe that is a concern if you are mounting it with plexi. The stock micro-switches feel slightly less responsive than the Sanwa. Hope that helps

1114

I just added NEW color Ball-Tops and Bubble-Tops for the Rollie Joystick.

Thanks,

Ponyboy

1115

It does help, thanks. I’d be putting these in a TE, so I’d have the switches to swap out anyway, but I’ll know to keep an eye on those clips. Do the Rollies have the little nubs at top that most people sand down?
Anyway, I’ll be making an order for some clears this weekend ponyboy, I’ll send you an email.

1116

Just added Sanwa SW-68 Micro-Switch $1.25 ea.

Thanks,

Ponyboy

1117

I’ll be all over these as soon as I get word that they’ll fit into plexi. I’ve got some seimitsu buttons that can’t mount in something so thick…

1118

Just added Ball-Tops, Bat-Tops and Bubble-Tops.

Thanks,

Ponyboy

1119

Just got in a sample transparent snap in from ponyboy. KNserts will fit in them beautifully, but you have to notch the KNsert board in the corners. I’ll see if I can notch future versions of the board myself. I will say this though; even if you dont use a KNsert, definitely get this button for LED mods. The main housing is a hair longer than a KN button, and there’s tons more room where LEDs could be put in without any fear of interfering with the operation of the button. I’ll definitely be ordering a bunch.

1120

cool nice to know toodles. Guess this blue buttons can be very close to ps-k buttons with same or will fit seimitsu microswitches too.