I’m having trouble with the start and back buttons for the Remora hooked up to a modded 360 stick with a ChImp SMD. The Start and Back buttons work fine on a 360, but when I use the stick on a PS3 it presses both start and select at the same time when I only mean to press Start. I rechecked all the wiring to make sure nothing is shorting it, and I’ve narrowed the problem down to the Remora causing the problem due to how the board is designed (The harness for start and select is made so it acts like one button). Is there any fix about this?
the start and select are not wired as one button, they just use a single harness for 2 buttons
post pics of your soldering and if you cut the trace on the remora for the TE-S lock function
Toodles any chance you are going to get more of these in, I am very interested. Want one.
Vicko, I’ve decided I’m going to rewire the thing since it’s been a while since I messed with the stick at all. I’ll post a pic if I run into the same problem again.
So I’m new to this and I was wondering how to set it up so were it flashes one color on the press and hold of a button
cause right now I have it set up where it flashes multi colors on stand by and button holding
also like to know when more will be available for sale 
From http://godlikecontrols.com/download/RemoraWelcome.pdf
Favorite Colors:The Remora has many display modes that use your saved Favorite Colors. In Setup Mode, you
can hold down Select, and the currently saved Favorite Colors for each of your play buttons will be shown. If
you want to change any of them, just press the button you want to change while Select is held down, and then
release Select. You’ll see buttons 1, 3, and 5 show up as blue, green, and red respectively, while the rest will
show the current color. Pressing the blue, green, and red buttons will increase the amount of that color; hitting
the buttons underneath blue, green, and red will decrease the amount of that color. Once the color is adjusted to
your liking, hit Select to go back to displaying the favorite colors so you can tweak other button’s colors, or
release Select to go back to Setup Menu. Colors will be saved when you press #5 to exit the Setup menu.
Still interested…any updates?
I’m looking to buy a Remora and 8 ArcEye 3 LEDs. I’ve been scouring the internet trying to find a place to buy all this stuff, but the order form seems like it hasn’t been updated in a while. I see that people are still able to get these things, but I’m just trying to find a place to buy this stuff! I have the money and everything right this very second, can someone put me in touch with toodles, or at least in the right place to make an order to get these items! Wanting to start work on this stick this week if possible! Any help would be GREATLY appreciated! Thank you!
does anyone have the install pdf they can send to godspu at godspu dot com? toodles’ link is not working.
nevermind. after actually looking at it it’s obvious and simple.
I’m glad I grabbed them when I did. I would buy more if they became available again.
would it be possible to have the remora control 1 extra arceye or is it limitedto the 8?
the extra solder spots can power another remora but are limited to a single color<br>
<blockquote class=“Quote”>
<div class=“QuoteAuthor”><a href="/profile/3189/Vicko">Vicko</a> said:</div>
<div class=“QuoteText”>the extra solder spots can power another remora but are limited to a single color<br></div>
</blockquote>
Thanks man, appreciated I think I’ll just get a couple additional single colour LEDs for the outer edge and draw power from the remora, sounds doable?
you could use another arceye but only solder to a single (or combination for purple, etc.) post and ground.<br>
while back i asked on how to solder the FGwidget board with the Remora/PS360+ since i didn’t know jack shit about soldering or even how to install a damn button… nobody replied so i took that as a do your research faggot. i managed to get it working and she’s a beaut. thanks toodles for such great boards & purple arms for the arc eyes. i just wanted the FGwidget to control the fade when i move the joystick. something with that feature on the next version of the remora would be nice.<br><br><img src=“http://i47.tinypic.com/iptf0m.png”><br>
Will there be any restock soon? There are the Arceyes but no remora
I need more also. I have a feeling there is a revision on the way.
wasn’t there also supposed to be 32teeths board for these too?