Hey guys I need some advice I hope you can help me out.
I have a HORI RAP V Silent Stick which was bought from the japanese market. This version has less spacing between joystick and pushbuttons furthermore buttons are reduced a little more opposite the US kai version. Unfortunately I cannot used to it, but I really do like its silent features. I am planning to buy a new HORI Tekken edition stick because it seems much better choice for me except the standard hayabusa parts. What do you think can I replace the joystick from it to my silent joystick?
The silent buttons will be a plug and play replacement, but the lever requires a connection to USBVCC for power, meaning you can’t use the 5 pin harness for the lever in the T7 HRAP since the silent lever requires a 6pin harness. You’ll need to do a bit of soldering to get it all working.
I have the same silent stick. Its pretty awesome. Swapping the silent stick to the t7 stick will require 5volts to power up. Reg harness has 5 pins and the silent stick has a 6th pin (5 volts) basically you connect that extra pin to 5 volts and its done. An easier option would be to swap in a silent sanwa jlf into the t7 stick if you don’t feel comfortable soldering. If you were local to me id be able to help.
Thank you so much your advices, help me lot! Yesterday I got the T7 stick, its way above my expectation. The cabinet itself really comfortable with useful features like headset port and option button cover and the layout perfectly fits for me after all. I have a friend in my community who has some soldering experience, I think I will ask him for help me out to the modding.