Hello everyone, I was wondering if anyone has put a Myoungshin Fanta or Crown stick in their razer panthera, and if so how easy/hard is it? Is the mounting the same or different from the JLF? I’d really like to put a Myoungshin Fanta stick in my panthera and would greatly appreciate any advice you wonderful people could offer. Thanks in advance.
You need a Japanese mount crown unless you plan on modifying the top of your Panthera to accommodate the collar of a proper(for lack of better term) Korean stick.Even then I’m unfamiliar with how thick a Panthera stick is so I’m unsure if it would fit then.
does work i have a fanta in my atrox with room to spare im guesing the panthera has the same mounting you just need a mounting plate like platynumx said either one of a crown 309 or theres a universal sanwa mounting plate and a 35mm step drill bit. Pretty easy i would just make sure you are set on k sticks cause once you drill that hole thats all thats gonna fit unless you can change the plexi which i dont think the panthera has. Why not just try the crown 309mj first that will screw straight in then see how you get on?
The Panthera does have plexi. The artwork is attached to it, but the plexi itself can be taken off and changed.
Just get a 309mj since they share the same mounting pattern as a JLF.
The Panthera does have plexi. The artwork is attached to it, but the plexi itself can be taken off and changed.
oh nice then he’s defo got some options if wanting to got back to jlf at some point
i second the 309mj it is a decent stick
It looks like there are other mounting holes that might be able to fit the Myoungshin Fanta stick in the panthera. What else would those holes be used for?
Those holes are to mount the stock jlf in another position since the pcb on that stick is rotatable. JLF mounting is a little bit longer than the K-Stick.
To accommodate a lever with this style mount plate
You can install a Japanese stick after drilling the hole for a korean 35mm one. It will look funny, but you can. The hole on the case isn’t guiding the stick at all, the gate and the shaft are. Just from my experience.
well som pics of myn not that its necessary
im using a 309mj with a 303n collar no other mods
http://i.imgur.com/MLA9fxAm.jpg
http://i.imgur.com/gR0je4nm.jpg
So the panthera hole is big enough for a fanta to fit in perfectly? no wiggle room and no need to drill it any bigger?
just only needs a universal mounting plate or crown jlf mounting plate to use it? thats it?
i always see Knee and other koreans using razer panthera and wondered if they had to heavily mod it for their sticks.
no no you have to drill the stick for the fanta the collar is 35mm myn has been drilled same with knee’s , saint ect