PS4 Controller Padhack

[UryuRNK]

I don’t know if I post this question at the right place, but is anyone here who has hacked a normal ps4 controller pcb before?

[BolSadguy]

@Gummo

[EJM]

Official DS4 padhack thread

Dual Shock 4 PadHack Thread - aka you should padhack the hfc4 pad instead

I strongly recommend using thin wires like 30 gauge wire. I get mine from radio shack: http://www.radioshack.com/product/index.jsp?productId=2062641 You’ll also going to want to make sure your wire stripper can handle the tiny sized gauge. http://i79.photobucket.com/albums/j138/gocontourgo/projects/DS4_Padhack/IMG_0357_zps21e06c8e.jpg If you are planning to wire up the usb and not use the jack then you’ll want start there. http://i79.photobucket.com/albums/j138/gocontourgo/projects/DS4_Padh…

Third party ps4 padhack thread

Third party PS4 padhack options

Hori Fighting Commander 4 [image] [image] [image] [image] [image] [image] You have the option to solder to the top or bottom of the pcb. To solder to the top you will have to scrape the contact pads to expose the metal contact. There are two switches that are of importance. One is for th…