So I looked around for some help, but I might need some personal assistance from Tech Talk.
I noticed one day that my joystick inputs stopped functioning on my TE stick. I have double checked that it is indeed set to DP. My buttons register on my PS3 and PC.
I have tried connecting a new JLF as I thought it was just a broken JLF however that didn’t work.
Tonight, I’ll connect the current JLF to another TE stick to make sure that works as well as I figure the more information the better.
Any help would be much appreciated.
Could be the wiring harness, make sure the harness is secured on both sides. If you got a multi meter, check the harness for continuity.
Connecting the JLF to another stick is a good idea. As your systematically eliminating what could be wrong.
Thanks, I connected the JLF to another TE stick and it works fine. How exactly do I check the wiring harness for continuity. I’ll see if I can get access to a multimeter so I can try this out. Would using a wiring harness that I know to be working from my other TE on the broken one, help eliminate anything?