Possible dual modded TE

is it possible to mod a ps3 te with a pcb off a 360 te?

Yes.

i gave up looking for a 2nd case… so i bought a cheap ps3 TE… so im gonna try to get it done… is there a walkthrough on how to do it?

Step 1:
Hack Xbox 360 PCB
http://shoryuken.com/f177/how-padhack-08-09-madcatz-4716-common-ground-xbox-360-pad-197388/
Some photos from this thread might be useful
http://shoryuken.com/f177/installing-mc-cthulhu-imp-xbox-360-sf4-se-stick-184787/

Step 2:
DualMod it.
http://shoryuken.com/f177/2-pcbs-one-stick-possible-146124/

Step 3:

If you want one USB Cord, use a DPDT or Imp Switch.

Unfortunately the PS3 dual mod is not a popular option. I don’t know if there is a walk through.

Edit: Now I know! and knowing is half the battle! GeeeeEEEYYEE JOEEEEEE.

http://shoryuken.com/blogs/chowwun/unessentials-ps3-te-stick-dual-mod-work-blog-pt-3-4-1015/

rtdzign, love the GI JOE saying. :stuck_out_tongue:

Can probably skip step one. Considering the TE’s PCB doesn’t really require hacking open a pad. Or trigger inversions. Heck, if you got crafty enough, you could probably keep the Turbo and RS/LS/DP functionality.

This tutorial is kinda sloppy, but it’ll get you started.

http://shoryuken.com/f177/ps3-te-stick-modded-360-sf4-madcatz-fightpad-56k-death-196633/

Doesn’t mention a DPDT switch but I’d recommend getting one.

i have a pcb of a TE 360 and i just bought a ps3 TE and im trying to combine them together…

Yes, you can do that.

Connect Directions to Directions.
Connect Buttons to Buttons.
Connect Ground to Ground.
Connect +5V to +5V.

Either have two USB cables going out.
Or use DPDT Switch or Imp to have only one USB going out.

i think im going with the switch… thnx jdm for the info…