Loving the ease of use of your new pre-wired 3mm leds Brian!
Butter that looks awesome.
Butter, everyone loves your balls 
New products are going in the shop tonight and tomorrow!!!
I must have a set of those led rings Brian!
Ok, we added about 30 products to the store, hereās 2ā¦
Clear Sanwa Plungers:
http://www.paradisearcadeshop.com/1227-large/paradise-obs-plunger.jpg
Experimental RGB LEDsā¦ 24mm for sale:
http://www.paradisearcadeshop.com/1216-large/pele-24mm-led-rings.jpg
Oh and ball topsā¦
Check this out!
http://www.paradisearcadeshop.com/en/66-paradise-arcade-balltops
Forgive me if this is a stupid question, but is that a female connector on the end of the JLF .187 harness? In other words, do you plug this harness into the 5 pin connector coming from the PCB of your arcade stick, and the QDs to the microswitches?
Brian, do you have any of the white balltops undrilled? I need 3 to fit normal 6mm threading. I can drill and install inserts myself.
Brian, would you mind showing one of those Pele RGB LEDās wired up, at the moment I would just like to wire it straight to a Cthulhu w/o an LED controller just for the normal white light. Iām not certain how the QD would there or if you use a pin connector?
Not a stupid question at allā¦ this adapter is the male JLF with female QDās so you can use regular micros and plug into a stick made for a JLF.
Butter, no we donāt they are all drilled and tapped, howeverā¦ the bat top threaded inserts are the same (10mm to 6mm), see a theme, maybe there is a reason we matched the bat top threading, maybe itās just coincidence And I have some on the way, but I couldnāt keep my balls secret forever!
You can use one of these:
http://www.paradisearcadeshop.com/301-794-home/4-wire-100-header-wiring-harness.jpg
Connect the white to power and the three others to ground, or you can just use a two pin and make a little jumper on the led. I can do some pictures later tonight or tomorrowā¦ But basically there is one pin for power and 3 pins for ground, what ever compbination of the three you hook up will determine the color.
Do you stock the 10mm to 6mm adapter?
In 2-3 days handling and 4-5 days shipping time, the answer will be yes
Thanks for the extra information, Iām looking forward to seeing the pics. This is the exact solution Iām looking for to complete the bling factor of my arcade cab.
My most recent orderās been stuck in the āpreparationā phase for a week. Is something wrong?
Everything is moving along, the holiday weekend put a crimp on shipping for 3 days, however Susan was plowing through orders last night!
As of right now, hopefully changed in a month, the status and shipping are linked by manual entry. Hopefully in the next 1-2 months the status will be automatically updated when we print a shipping label. Email Susan at sales@paradisearcadeshop.com if you have any questions.
Couple questions that could have been confirmed or not. For the Pele LED light rings, is it recommended to use the Sparky PWM or preferably something else? Another thing I wanted to ask is if the LED rings work for most buttons on the market, would that include the new Clear Sanwas both 30mm and 24mm?
Thanks.
Any chance on this Brain? Akihabarashop is literally the only store on the web that carries these in solid colors.
Drool. Please post a tutorial for this if there isnāt one up already.
Thanks its super simple the only issue is the bottom piece of super thin plexi like stuff that I have huge roll off like a 100 feet or something from when my grandpa worked for DuPont,but I can give you a sheet. the top piece is just a piece of plexi I cut to size just simple scroll with a razor and I picked up the pcbās standoffs from crap shack I also carefully dremmeled the bottom of the extra metal to help it lay flatter.
Iāll second that. Iām making a repro Versus City stick and need a set of pink PS-14-Gs. I loves me some flat Seimitsus!
Definite possiblityā¦ New springs arrive in the next 3-4 days!!! no more having to double springs for your JLF