Options for dual mod PS3 TE

[emudojo]

Basically there’s no stock on anything… how am I supposed to do a dual mod if there are no PCBs?

Any ideas? PS360+ is vaporware to me and the ChimpSMD has been out of stock for centuries now…

AE for PC is coming and my stick TE BlazBlue does not work with my motherboard (laptop) dualmoding will save the day (360 mode)

[d3v]

Padhack a 360 pad.

[Eben01]

Exactly.

Pad hack plus imp, or just pad hack plus dtdp switch.

I did it, and can tell you that there’s a huge sense of achievement when you finish.

[Easty]

go to toodles directly for a ChimpSMD or a MC Cthulhu. IIRC, they are both compatible with PC…Well I know the Cthulhu is.

[jdm714]

Toodles is vacation in Switzerland and UK.
He will not be back until July 20.
Last day order was Tuesday.

The answer is what d3v and Eben01 typed.

[Kuya_Joe]

No reason to want a chimp for a ps3 te anyways…padhacked 360 fightpad/imp as suggested is the way to go…

[Nerrage]

Dual modding 101 is worth a read for you.

[emudojo]

any good guide on setting up the imp+fightpad on a PS3 TE?

most if not all of the guides are the other way around 360 TE with a an external board,

also just the imp http://www.lizardlick.com/Toodles-Imp-Board_p_544.html and
http://www.amazon.com/Xbox-360-Street-Fighter-IV-FightPad/dp/B001M244HA/ref=sr_1_14?ie=UTF8&qid=1308614970&sr=8-14

are needed ? no switch or anything to physically use switch between consoles?

[jdm714]

Installing a Madcatz 4716 pad and Imp into a PS3 TE Stick

Yesterday I attempted (successfully I might add) to do a dual mod from PS3 to 360 using Upas’ great 4716 pad hack tutorial to get the triggers working and where to solder. This bastard took me the whole day (about 6 hours) to do, as it was my first attempt at dual modding the PS3 to 360 and the first time I did the trigger hack, so I had to take my time. The schematic I used had the same principals as the infamous Bomberman 360 to PS3 dual mod tutorial Wired it like the following PS3/360: [L…

PS3 TE Stick modded with a 360 SF4 MadCatz FightPad 56K death

(Authors note – I did a search and found nothing that uses the madcatz fightpad for 360 This is also my first mod that I’ve done and my first tutorial like this so please do give me feedback via pm on areas where I could improve) So basically this is a tutorial on how to dual mod a Street Fighter 4 TE stick with a XBOX360 Street Fighter 4 Fight Pad. This is great especially if you want to only take one stick to a tournament and not have to worry about if it will be 360 or PS3 consoles. Total…