Just wondering if anyone has a link to the welcome and intro document that is linked in first post or is able to send it to me so I can get everything ready for when I recieve mine in the next week or so.
Thanks alot
Silly question, but is it still possible to reuse the wiring terminals from the TE in doing this mod and also is it possible to mount the usb connector listed in #1006 in the cable compartment?
Thanks alot
Hi,
First of all, wanted to say thanks for making such a great product. I absolutely love using my TE stick wirelessly and the axisdapter made that mod incredibly easy.
Now though Iād like to make my stick work on X360 but of course we have the dread non-common ground problem.
Are there any plans to release an updated axisdapter that might have the ability to convert to common ground, or otherwise have a workaround for drop in modification to the ever popular madcatz TE?
So I just finished my chimp + 360 TE mod and its great. Now I have my PS3 TE and my just arrived axisdapter and I want to dual PS3 wired+wireless mod. I know about the destrucables how-to but Im wondering if anyone has done a mod with some sort of switch to go between the TE PS3 PCB or the Sixxas+axisdapter pcbās but using only one USB cable?
My googles and SRK searchs are not going well.
What youāre looking for is Gummounedās LEO board, which will do just that and that a few people have used on their wireless dual mods
Not sure why but my AXISdapter stopped taking the direction inputs. The buttons work fine but the directions are non-responsive. I tried switching the joystick, and then using a different sixaxis to conclude that something is wrong with the AXISdapter. Anybody know why this might happen or what I can do to fix it? Thanks!
Anyone know where i can get a copy of the āWelcome and Intro Docā the link one the 1st page is dead.
The ground wire on your direction buttons is not connected properly. Thereās a proper ground for the directions and for the buttons. Your direction padās ground is loose or not in correctly.
2nd thatā¦ im finally going to finish my stick and need to know what CMNĀ® CMNĀ© CMN(L) CMN(PS) and how to hook up the ps3 button? Any help would be nice thanks all!!
thanks jdm!! i just got my tek case and ready to go
Sixaxis Player led solder pointsā¦
Hey guys need some helpā¦ I am currently trying to do a dual mod on my VLX premium 360 stickā¦ I got everything down the only thing Iām stuck on is the player ledās I want to connect the sixaxis & wireless MS pad player ledās to the VLX ledās
Anyone with close up pics or detailed writeups would be greatly appreciatedā¦
Sell me the pcb box from your VLX and Iāll make sure you get all the info you need.
Hey Toodles, wish I could but I need the box to keep everything nice & tidy, can you please help me out regardless, Iāve been searching all over for pics or writeups and have no luckā¦ please help me if you canā¦ you can email me details directly at Bwong76@gmail.com
Thanks,
Brandon
You can send me the pcb from inside the box 
I dont have details on how the sixaxis leds are wired up. VLX leds are all wired through the 7 pin connector; If you look at the pins on the box, going left to right, its P4, P3, P1, P2, Guide(signal for button), VCC, and GND. Leds are common anode, each with a 350ish ohm resistor in series and a Vforward of about 1.8v.
quick question allā¦ i have 6 buttons panel and two extra in front. i was going to use the 2 in the front for start and selectā¦ now i can i blank out select button for a home button? or do i have to do the slag start and select?? thanks
Toodles, You got email!
Hey Iām curious if you make an adapter like this that is compatible with newer PS3 Dualshock 3ās? Hard to find the older controllers these daysā¦ at least in my area it is. Thanks.
Just got the axis board and Iām trying to install it but I am a little confused. I canāt seem to find a diagram of what goes where thats more detailed. Well specifically Iām confused as to what wires are COM_L, COM, and maybe COM_R? Well my instruction sheet just shows COM_L(on the side with L1, L2, Left, Up, etc), COM(side with PS, SE, ST), and COM(side with R2, R1, Triangle, etc). I also donāt know how to wire the PS button as Start + Select. Please help,
Thanks in advance.
Ok I got everything working. I guess itās pretty straight forward. My only issue now is how the ps button will work off the madcatz pcb. Touching the wire from axisadapter to madcatz pcb ps button acts as āonā, so what will happen if I solder it? Iāve seen some people solder the wire to the ps button portion of the pcb but wouldnāt that act as a complete circuit? If somebody could chime in and give me some advice or send me a pm, thatād be great.
Rich