New Foe Hammer Custom made Arcade Sticks

Trading Outlet
1

What’s up yall. Here at the Foe Hammer Shop we’ve been busy improving our processes and growing as company. We’re new and improved, you could say. Foe Hammer has teamed up with Reverge Labs, creator’s of the Skullgirls, and we’ve been providing the Champion sticks for their tournaments including EVO 2012. We’ve got a ton of new sticks and cases available on our website. If you’re interested in checking out more of what we’ve done in the past, hit our Gallery page. We’re a small company trying to grown and push the boundaries of design. Hit our Contact page regarding your next custom stick. Feel free to post comments or questions here also. Peace!

  • First Place Prize at the Skullgirls Tournamnet @ Evolution 2012, Las Vegas.

This one will be for sale on our Website by the end of the day. If interested contactus.

Multi-Console Cthulhu / Pad hack. Plug and play ready.

2

Holy fucking shit, these are gorgeous. Oh my god.

3

holy cow those cases are SEXXXXXXY!

4

The Green and black case is made of Solid African Padauk wood, painted a metallic “citrus” green and matte black. The wood grain is still visible, rusty oranges and fine grain.

We can modify this case in regards to the top panel button layout and joystick mount. We can also provide a PSD template and swap out graphics if preferred.

**PRICE: $300.00 **(free shipping to anywhere in the continental US)
**Components **(currently installed)

  • Sanwa (Black) OBSF 30mm push buttons
  • Sanwa (Grey Plunger) OBSC 30mm Home/Select/Start push buttons
  • ToodlesCthulhu- Compatible with XBOX360/PS3
  • Neutrik USB pass through (quick disconnect) - comes with 15 foot A/B USB cord.
  • Recessed non-slip rubber feet - low profile stance.
  • Acrylic top and bottom panels.
  • Still plenty of room to etch something on the bottom acrylic (component cover panel).

Measurements

  • 14 3/4" wide
  • 8 1/2" front to back
  • 2 1/2" tall (feet to top panel)
5

What up! Good morning or Good night depending on where you be at on this planet.

Below is a new case for sale. It was hand made and hand painted. No components included, it’s an empty case ready to be wired. If interested, hit our Contact page on our website (FoeHammerShop.com).

**PRICE: $150.00 | **Free shipping to anywhere in the continental US.
Material: Made of solid African Padauk wood. High gloss black accent paint. High gloss top coat. Very durable
**Components: **None Included, empty case ready to be wired.
Features:

  • The Button layout and joystick mount can be modified fro your preference
  • Neutrik USB pass through- pre drilled on back panel
  • Recessed 40mm non-slip Aluminum Feet
  • Acrylic top and bottom panels.
  • Plenty of room to etch something on the bottom acrylic (component cover panel).

Measurements

  • 14 3/4" wide
  • 8 1/2" front to back
  • 2 1/2" tall (feet to top panel)
6

Finally i like ur sticks … well job man
btw keep polishing ur skills

7

Thanks dude. I appreciate it.

8

What up everybody. Below is a new empty case. The top is uncut. We’ll cut the desired button layout and joystick mount for the lucky customer. It will be available for purchase on our website later today. Thanks!

Price:
$165 + $20 (shipping)

Additional Features:

  • If you would like us to provide graphics and install the components add $250.00
  • Custom laser etched component panel add $20 (graphic provided by client).

Specs:

  • 16" wide
  • 10-1/2" front to back
  • 2-1/2" from the bottom of the feet to the top panel plexi
  • Home/Select/Start fit 30mm push button’s.

Custom paint and shape. Recessed 40mm Aluminum non-slip feet for that “low rider” profile.

Button’s Not included but, the Home/Select/Start button’s will accomodate any 30mm push button you prefer.

The Neutrik or RJ45 will be cut depending on which you prefer

This is a shot with direct sun light. It’s changing colors depend on what angle you’ll looking at it. Green, Red, Purple chameleon.

Custom Etched plexi component panel. The under side of the bottom panel is also etched with FH logo pattern.

9

Could you make a custom korean stick? just need a case. nothing else except the spot for the quick disconnect in the front

10

the website says the lizskin is 135 then when added to the cart it goes back to 165

11

any pics of the bottom? interested in the FH Ludo.

12

Yes, we can make a custom Korean stick. What type of wood? or Paint are you looking for? Sizing? Do you already have the parts you plan to install? Thanks!

Shep

13

OOoops, sorry about that. It’s fixed. There was some default pricing applied. My bad. It’s ready for puchase at the $135 price. Thanks!

Shep

14

I can have some pictures to you first thing tomorrow morning. I’m out of the shop till then. Send me your email and I’ll send them to you as well as post them. Thanks! - Shep

15

Nice stuff. :slight_smile: :tup: