Is there anyone available for dual mods in Bakersfield?
Hey, Iām looking for some help with my stick in Austin, TX. Iām pretty new to a stick, got a TvC SE stick off ebay used for a pretty good deal. Bought the adapter to use it on the PS3, itās been nice. Lately though, one of my buttons seems to have become much less responsive and I tend to drop a lot of combos because the command just doesnāt come out. I was curious if anyone could help me A) confirm that my button is in fact becoming a little wonky, and if so B) help me get a new button in there.
hey chuuu i live in toronto and wish for you to mod my stick its a te stick madcatzā¦ i live downtown toronto so maybe u wanna reply and send me your number so i can talk. thank god i found u
How do i get on the list above? Can I get added as a modder?
First Welcome to the community of stick modders and builders.
Post where are you from, we donāt need a address just a State and home city, if you are Outside the US, the Country, region/province you are from and city
To be on the safe side you you to also be eligible for selling on the Trading post, which from your profile you are. And you have a gallery of your works that also good.
Hey guys trying to find a modder in the Leeds / Huddersfield area in the UK. I want to dual mod a hitbox to work on a xbox 360. i have the hitbox and a xbox 360 mad catz fight pad to use for a pcb. Ive had a word with a few people around sheffield and london however if i can find someone closer to home it would be much better. Please PM me with costs and what it would involve and such as i am very new to this. Thanks guys ^^
Hey all trying to find a modder in the Delaware area, please feel free to PM or post here thanks, I want to get my 360 TE stick Dual Modded
If anybody need stuff in the south east, I gotcha. Right outside Atlanta.
You are not allowed to sell or provide service with cost to SRK yet.
It is rule; you do not have the requirements.
Im pretty sure I didnt, just stated where Im atā¦
People will come to you now that they know where you are.
So are you going to tell the customer to wait until you can sell and service?
Why not wait until you meet the requirements to tell where you are located?
You say customer, I say friends, we just drink tea and play fighting games.
I saw your work.
It is very good one.
I have friends in GA.
I will direct to you for tea and play games.
But they will not give you any money until you are allowed to.
That sounds wonderfulā¦
Darksakul said it all. Make a post and I will get you up. chuu removed by request of himself.
Alright please add me to the list. I made a thread in the trading post. see my signature. I am from NorCal. Vacaville, CA
Newer edit
Obviously Iām much more qualified for work than I was in the past.
SRK TT Modder of the Year 2014 is self-explanatory.
Iām limited in what I do for the general public nowadays though, so contact me and if I donāt have the time to help, I can guide you to someone qualified to do so.
New edit
The post below is pretty old, but Iām still modding. Whenever I look back at my previous work I think itās garbage (even though it did the job) so Iām much better than I was.
Just hit me up with questions on anything newer than what is listed below.
Original post
Add me please! 
Name-
-FrankCastleAZ
Location-
-Phoenix, Arizona
What I can do-
-Replacements for stick, buttons, wires, quick disconnects, usb cables
-USB adapter or RJ-45 adapter installation
-Padhacking via PS1 digital or analog, Gamecube monoprice and other 3rd party, Dreamcast 3rd party and 360 Fightpad/Brawlpad
-Dual/Multi mods using PCBs and/or padhacks with individual outputs
-Dual/Multi mods using PCBs with RJ-45 ouput
-Button LED mods using Toodles FGWidget and KNserts or Sparky and Uila
-Stick LED mods using hollow shaft, slip ring and a power source
Prices
-Labor costs run between $25 and $70 depending on the size and length of the project omitting small projects like an artwork change
-I require the entire cost up front. It used to not be this way, but Iām tired of having projects waiting for people to pay me and pick up.
-No shipping. Drop off/pick up only.
-Support for any minor issues after stick is completed (such as a resolder or replacement quick disconnect) is offered at no extra cost
Current Inventory Available
-30mm buttons in misc colors (Sanwa/Semitsu/Madcatz)
-30mm Holeplugs
-US buttons in misc colors (Happ/iL)
-US joysticks in white (iL)
-Madcatz TE 360/PS3 ribbons
-Dustwashers
-Microswitches (Cherry or ESwitch)
-PCBs common ground (Dreamcast 3rd party, PS1 digital, Gamecube 3rd party)
-Other random crap
Some specific finished works-
-Madcatz TE-S 360 with art&plexi, clear semitsu buttons with art, custom dustwasher and Chimp SMD
-Madcatz TE-S 360 with Chimp SMD screw terminals removed soldered directly to board, super wiring braided with clear heatshrink and a clear Lexan plexi made for bottom
-Madcatz TE PS3 with padhacked Madcatz Brawlpad and Imp v2 and Neutrik USB adapter
-Madcatz TE 360 with TE Kitty and Neutrik RJ45 adapter
-Agetec Dreamcast sticks with 30mm Sanwa buttons (Required expanding 28mm holes) and Sanwa JLF joystick (Required removal of old tabs and part of side, minor sanding)
-Madcatz SE PS3 multimodded with PS1 digital padhack (Cords were kept inside case to add weight) and replacement with all Sanwa parts and Neutrik USB adapter (Placed on outside of cord compartment to show red LED USB cord)
Check out my website that features some of the work Iāve done at
http://www.frankcastleaz.com
Contact Info-
Phone number and email address is listed on my info page of Facebook
Note- TOTALLY STOLE THIS GENERAL FORMAT FROM SRK USER āROYALFLUSHTZā
-FrankCastleAZ
Both have been added.
Hey Bluenine do you still do mods/repairs?
Is anyone in this thread willing to give me a price on getting a dual mod for an xbox 360 standard edition madcatz sf4 fightstick? The original wire from the panel to the xbox got chewed up pretty badly right around the base of the stick, so the new one would have to be re-soldered to the motherboardā¦I am willing to send pictures of the damage to anyone interested.