MVC TE Fightstick Question

I bought one yesterday, I really enjoy using it, especially since I just upgraded from a SFIV SE stick.

But I noticed a sound that bothered me…

Every so often, I’ll hear a "crunch"ing sound. It’s not very loud, but I feels as if my joystick is getting stuck or snagged on something. Any thoughts on what this could be? Or how to fix it?

I would say take the toop screws out and sse if there are pieces of loos plastick or anything in the casing.Hope that helps

Okay, so I popped it open, broke down the joystick to the spring. I noticed a washer, that when I moved the joystick, began to circle with it. It’s covered with a lube (?) substance. I noticed this was on the PCB as well. I don’t want the washer to destroy my PCB, should I glue it down? I noticed it was the washer making my joystick, stick a bit.

do not put glue in your JLF

I ordered a JLF from lizard lick that I put into a SE and I notice that plastic crunching sound aswell.

What to do about it?

If you search the forums, I am certain I once came across others who ran into this same problem with the JLF washer. I am not certain what purpose the washer actually serves, however, I suppose if I had the problem, I might try securing it down with a bit of automotive liquid gasket which will not hurt or damge electrical components unless you gob it up into the switches.

I suppose without knowing I have to wonder is it a “moving” washer that is causing the grinding/crunching problem or is it simply the washer itself?

I’ve heard about this problem with the SE sticks, which it why I was asking if I should glue the washer down… But, don’t worry. I won’t.

My JLF never come with that much grease.
I never got one that is overflow like yours.

Hm, is too much grease a bad thing?

there is only supposed to be enough under the washer to where it creates a suction between it and the base.

Ah, okay. Thanks, I see it now.

There does seem to be alot. There was some grease on top of the PCB, just in alittle spots though.