My Mad Catz TE2+ is pretty new but i have problem with jumping forward to left side, often it wont register the jump but instead it walks left side.
I dont know what to do, anybody that can help me please?
Hi, the lever must hit both switchs at same time to performe this action. Try opening and do some movements to see if when you do up-right it active both switchs.
What type of restrictor gate do you use? Square or octagonal ?
1 Like
I use the original square gate, it was working perfect before but now i have this problem.
Try doing what I said.
Something similar happened to me.
I bought an used arcade stick and the lever was monted with a little wrong angle (like 93º, not 90º), it caused a lot of miss inputs to me. I opened and positioned it right.
Its important to watch how the lever works inside to see if everything is ok. You will lose warrant, but if is in warrant exchange is a good option.
How long have you had it? The lever might have gone bad and may just need to be replaced. Lever is the Sanwa stick you’re most likely using.