Plexi Faceplates - ArcadeForge
For TE sticks I believe he does~
Ones that replace the Bottom Metal Plate.
I don’t know why.
Laugh.
It would not make sense.
Since there is a layer of plastic covering everything.
I guess it’s if you want to put artwork on the bottom of the stick X3
Hehe, no the bottom plexi doesn’t replaces the Metal bottom plate, the plexi bottom only is addtional plexi layer to put artwork under…
heres my new custom
ryu artwork
8 black and 2 red sanwa buttons.
hadoken dustwasher
red bubbletop
countersunk screws
cheese (gamertag) in capcom style
plexi from benaco…- awesome plexi…love it
http://img237.imageshack.us/img237/5218/image167i.jpg
http://img820.imageshack.us/img820/9702/image237.jpg
Got my plexi and artwork today, looking good =)
Ah, I was looking forward to this art on a stick. It`s SSFIV Version, nice!
@ one eyed warrior : 
Looks great
Big thanks go to bencao74 for my new stick case :china: ! It’s conveniently small and low with a nice piano finish. Inside is a thick acrylic panel on which the joystick is fastened to. Currently on the top is a transparent panel plus simple artwork by me, but soon I’ll put on a black plexi, the black/gray buttons will be changed for white ones.
http://pohl-michael.gmxhome.de/images/blackie_from_top.jpg
http://pohl-michael.gmxhome.de/images/blackie_from_side.jpg
For the electronics I put in a Dual Strike V2 with a TEasy+TE360 PCB:
Cheers bencao.
When I first got the art out I was like “oh man this looks too dark” but upon applying it I was quite obviously wrong. Looks great!
Ahh it looks great assembled very nice…
Hey bencao,
My last order just arrived, and there are some issues, maybe i´m wrong, but i believe that i chose the six button holes option for the datel plexi in your store, but this one has eight button holes lol, and there´s no printed art at all…anyway, checking my paypal account i realized that i wasn´t charged for the art, so i guess that my psd wasn´t uploaded in your website.
About the plexi issue, there´s no problem, because i have two datel sticks right now, and i can use it in one of them, so i´m gonna order another plexi with 6 button holes (the six right holes), and i´ll try the upload of my psd for the art printing plus cutting again.
Let´s hope this time everything is ok 
Oh, So I wasn’t aware that you want artwork service 
Yes, sure, thanks for your patience. You want then the 6 button inline! Could you pm your real name, so i can check your order?
some new stuff
New Plexi faceplate for the Wooden Korean PS3 Stick from ETOKKIhttp://www.etokki.com/image/cache/Wooden%20PS3%20stick-500x500.jpg
http://2.bp.blogspot.com/_YLXgzxS8cEc/TG59bJIxhBI/AAAAAAAACHU/xf5Iv62fmuk/s320/IMG_0505.JPG
TE Replacment Plexi in Sega Button Layout
http://2.bp.blogspot.com/_YLXgzxS8cEc/TG59abtg5sI/AAAAAAAACHE/MtClYkp0G6w/s320/IMG_0501.JPG
Full White TE Cover
http://2.bp.blogspot.com/_YLXgzxS8cEc/TG59bj7rGGI/AAAAAAAACHc/tc0mIUfem8I/s320/IMG_0506.JPG
White JLF Mounting Plate
http://4.bp.blogspot.com/_YLXgzxS8cEc/TG59a-lkZwI/AAAAAAAACHM/wWE2raO6PrE/s320/IMG_0503.JPGBlack HRAP Plexi replacment with square keybutton cutouts.
http://3.bp.blogspot.com/_YLXgzxS8cEc/TG59b1jrHfI/AAAAAAAACHk/PR8IJWoX8ps/s320/IMG_0507.JPGHave fun
Hey, PM sent, i´ll try the upload of my psd, let´s see what happens lol
Ahmmm damn, it does not work…
Edit:
Ok, i just managed to upload the art, about damn time lol
Planning to order a Full TE plexi from you very soon. Is there a template that you would recommend me using to fit the art on it perfectly without any problems? - If that made sense, I’m still a nub at fightstick related things (:
Im not sure if this has been asked before but does the regular plexi extend above the red frame, and if so how many mm above the red frame is it?
And yes the plexis have rounded edges right?
And Jordunable i found this post that might help you
Thanks nisse.
Does it extend above the red frame:
Yes, only by about a mm as far as mine pops up anyway, if it were any thinner, it would probably break.
The plexis also do have round edges, yes.