Hey guys, i am just wondering about the total spacing required in between sanwa obsn-30’s. i am using the blast city template http://forums.shoryuken.com/attachme...7&d=1194999986
found there, and was wondering if i will be fine with 33 mm in between the centers of the buttons.
Any regular japanese style layout will work fine with the screw-ins. If you measure the distance between the buttons, the gap should be around 5-6mm. If it’s any less than that, you might find it impossible to screw the nuts on.
cool, that layout shows basically 5mm in between, it will be close but hopefully it works! Thanks!
With 5mm, you will be fine.