JLF-TM to Seimitsu LS-32-01 Mod

Tech Talk
1

ok this is my question, I tried to find the answer on other threads but haven’t been able to.

I just recently bought a hori real arcade pro ex fight stick with a JLF-TM joystick and I’m trying to swap out the stick and put in a LS-32-01.

I talked to chad at Lizard Lick and he said all I have to do is cut the wires connecting the JLF and splice the LS-32 5-pin harness and I should be all set. I get that part.

My question is that because the wires connecting the JLF to the PCB are all gray and not color coded, I dont know which wires to splice to the color coded wires on the 5-pin harness.

I hope that makes sense.

Any help would be great

Matt

2

Not all correct.
Chad did not tell you that the HRAP EX is non-Common Ground.

That means you would have to cut the Traces of the LS-32-01 PCB.
Doing to to separate the Grounds of the Microswitches.
Only then can you solder or splice like he said to.

3

Is there any markings on the hori pcb illustrating which line is up/down/left/right or ground?

4

You should save yourself some money and frustration and just put in a regular LS-32. No PCB to mess around with, just take a pic of the wiring for the JLF and wire it up like that. :cybot:

5

LS-32 and SS plate that comes with the LS-32-01 for proper height install.