Hrap3 sanwa mod

i just modded my stick with a yellow sanwa ball, 6 yellow sanwa snap-ins (for the main six action buttons), 2 dark hai sanwa snap-ins (for the far right two) and some black seimitsu snap-in 24mm’s for the select and start buttons. i have a few questions (two to be exact).

will these snap-ins ever come out again? they fit in there really snug once you snap them in all the way. i would like to mix it up a little depending on mood (have 6 more dark hai, a grey sanwa ball, and plan on getting some yellow sanwa snap in 24mm’s for the vshg look).

also, what can i test my select button on? i can’t seem to find any function in the xmb or in sthd for the select (unless there is a costume choice or something) button. i have tested all buttons and was a little concerned about the seimitsu 24 mm’s because the qd’s fit a little loose. anyway, thanks in advance for the help!!

i think with enough force they’ll come out, on another note jus modded mine not to long ago, http://tinyurl.com/7bjnf5

with snap - ins you have to be careful when taking them out or the clips will break.

I have moved my snap in buttons from stick to stick. Just be patient and work on getting out one half, and then the other.

plug your hrap3 into your pc and go to control panel>game controllers, then highlight the joystick and click properties. you can press all the buttons and it will light up the button number when its activated, and the same with the joystick movements.

thanks so much. i honestly forgot the thing was pc compatible. duh!

edit: and success! everything is working fine. i am loving the sanwas. even my girlfriend noticed the difference when she tried it. she used to be a pure pad (saturn usb) player but now she wants a stick!