Hrap ex to Hrap ex se mod?

Tech Talk
21

The skies clear

Thanks a bunch for the thorough post.

I now fully understand the challenges involved with trying to get a common ground stick to work with a non-common ground PCB.

Given what you said i will go with the non-common ground LS-32 on my HRAP EX. I’ve been taking a look at some videos on de-soldering and will get some quick-disconnects to make the plugging into the connectors on the LS-32 easier.

Thanks again for your help.

22

sorry for necroing such an old thread,but sorry to ask,is it ok to just fit the ls32 with flat plate without the ss plate? sorry for necroing this,really hope some one can help out a newcomer here.

23

Where’s my Rise from your grave pic? @Darksakul ?

24

Surprisingly I do have a life outside of Tech Talk

Yeah here it is

You really should of taken your questions to the [Absolute Question and Answer Thread](Absolute Question and Answer Thread v.3 (ASK YOUR QUESTIONS HERE!)

But to answer your questions, yes you can get away with the flat plate for the LS-32 but you lose a bit of the joystick high, you are better off with the S Plate.

25

sorry for necroing such an old thread,but sorry to ask,is it ok to just fit the ls32 with flat plate without the ss plate? sorry for necroing this,really hope some one can help out a newcomer here.

lolol, hehehe thx for the reply!!! thank you!!!